Sennheiser HS 2 005336 Leaflet

Cat. No. 005336

General Description

The HS 2 is an omni-directional headset microphone using an MKE 2 Gold 
capsule and fitted with a steel wire cable and a special 3-pin connector 
for Sennheiser 3000 and 5000 Series bodypack transmitters. The small 
capsule and gooseneck assembly can be optimally positioned for both 
vocal and speech applications. Also available as HS 2-1 in beige.

Features

j

  Frequency response optimised fpr close talking applications

j

  Lightweight design

j

  Flexible gooseneck for optimally positioning the microphone capsule

j

  Umbrella Diaphragm™ protects the mic against sweat

Technical Data

Pick-up pattern ....................................................... omni-directional
Frequency response .................................... 20 – 20,000 Hz ± 3 dB
Sensitivity
(free field, no load) (1 kHz) .................................. 5 mV/Pa ± 3 dB
Nominal impedance .................................................................... 1 k

Ω

Min. terminating impedance ..................................................4.7 k

Ω

Equivalent noise level
A-weighted (DIN IEC 651)........................................................ 26 dB
CCIR-weighted (CCIR 468-3).................................................... 39 dB
Max. SPL (1 kHz)...............................................142 dB (THD = 1 %)
Power supply .................................................................. 18 k

Ω/7.5 V

Connector .................................................3-pin audio connector for

SK 50/SK 250/SK 5012

Cable length.................................................................................1.6 m
Capsule diameter ................................................................ Ø 4.8 mm
Weight ............................................................................. approx. 34 g

Product Variants

j

  HS 2-1: as HS 2, but beige 

j

  HS 2-5: as HS 2, but with open-ended cable