Manualsbrain.com
  1. Manuals
  2. Brands
  3. Pentax
  4. K-500
  5. Operating Guide

Pentax K-500 Operating Guide

Download
Page of 313
259
Usi
ng
 th
e F
las
h
9
1
Set the wireless mode of the external flash directly connected 
to the camera to [MASTER] or [CONTROL]. 
2
On the wireless remote flash unit, set the wireless flash mode 
to [SLAVE] and set the channel to the same channel as the 
flash directly connected to the camera. Then, place it at the 
desired location. 
3
Confirm that both flashes are fully charged, and then take 
a picture. 
Wireless Shooting Using a Combination of External Flash Units
MASTER
Discharge both the flash directly connected to the 
camera and the wireless flash unit as the main flash. 
CONTROL
Discharges the flash directly connected to the camera 
as a control flash only, not as the main flash.
•
The Shake Reduction function is not available. 
•
When using multiple AF540FGZ/AF360FGZ external flashes and shooting 
with the high-speed sync flash in wireless mode, set the flash directly 
connected to the camera to high-speed sync flash mode.
K-500.book  Page 259  Friday, June 14, 2013  2:29 PM