Pentax WG-3 GPS Operating Guide

Page of 252
121
3
Taki
ng Pi
ct
ur
es
You can capture frames for fast motion playback.
1
Use the four-way controller (2345) to select c (Time-
Lapse Movie) from the Capture Mode Palette.
2
Press the 4 button.
The camera returns to capture mode.
3
Press the shutter release button fully.
Recording starts. The maximum length of continuous recording time is 25 
minutes.
4
Press the shutter release button fully again.
Recording stops.
• If you set a start delay, a start time corresponding to the current time and 
the start delay you set is displayed in real time.
• The total time you can set differs according to the shooting interval you set, 
as indicated in the table below.
• The Date Imprint function (p.107) is available for Interval Movie mode.
Using the Time-Lapse Movie Function
Interval
Total time that can be set
30 fps
1 min
10 minutes to 5 hours and 59 minutes
(in increments of 1 minute)
5 min
30 minutes to 29 hours and 55 minutes
(in increments of 5 minutes)
10 min
1 hour to 59 hours and 50 minutes
(in increments of 10 minutes)
30 min
3 hours to 179 hours and 30 minutes
(in increments of 30 minutes)
1 hr
6 hours to 359 hours
(in increments of 1 hour)
0 7 : 3 4
0 7 : 3 4
0 7 : 3 4