Pentax K-5 IIs Operating Guide
103
Sh
oo
ting
Fu
nctio
ns
nctio
ns
4
Choose the part of the viewfinder to use for measuring brightness
and determining exposure. The following three methods are available.
The factory default setting is L (Multi-segment metering).
1
Turn the metering mode switch.
The set metering method is displayed
in the status screen and viewfinder.
L
Multi-segmented Metering
The scene in the viewfinder is metered
in 77 different zones. Even in backlit
locations, this mode automatically
determines what level of brightness
is in which portion and automatically
adjusts exposure.
M
Center-weighted Metering
Metering is weighted at the center of
the viewfinder. Use this metering when
you want to compensate for the exposure
by experience, instead of leaving it to
the camera. The illustration shows that
sensitivity increases as the pattern height
increases (center). This mode does not
automatically compensate for backlit scenes.
• Turn the rear e-dial (S) to adjust the aperture value.
• Press the | button to retain the shutter speed at 1/180 second and
• Press the | button to retain the shutter speed at 1/180 second and
automatically adjust the aperture value.
• The sensitivity cannot be set to [ISO AUTO] in M mode. If the exposure
mode is changed to M mode when the sensitivity is set to [ISO AUTO],
the sensitivity is also changed to the lowest value set in “Setting the Range
Selecting the Metering Method
K-5 II_ENG.book Page 103 Wednesday, October 10, 2012 1:20 PM