Panasonic TH-47LF5E Operating Guide

Noise reduction

Off

y

XGA Mode

1024 × 768

Note:
After making this setting, be sure to make each adjustment (such as “Auto Setup”) on the “Pos. /Size” menu as 
necessary. (see page 21)

This menu is displayed when the PC IN input signal is selected. This menu sets two types of XGA signals with 60Hz 
vertical frequency having different aspect ratios and sampling rates (1,024 × 768 @ 60Hz and 
1,366 × 768 @ 60Hz).
When a 1,280 x 768 @ 60Hz input signal is automatically detected, the image is processed as a 1,280 x 768 @ 
60Hz XGA input signal irrespective of this setting.

Press to select “XGA Mode”.

Press to select “1024×768”, “1366×768”.

Press to select “Noise reduction”.

Press to select “Off”, “Auto”, “Min”, “Mid”, “Max”.
Auto:  Noise reduction will be automatically selected from “Min”, 

“Mid” or “Max”.

Note: 
Noise reduction can be adjusted while a Component signal from PC IN terminal is being applied.

Sync

Signal

[ RGB ] 

Cinema reality
XGA Mode

Auto

Off

1024×768

This function operates only during input from PC IN terminal.

Confi rm that the input is set to RGB input (this setting is valid only for RGB input signal).

Auto:  The H and V sync or synchronized signal is automatically selected. If both input, it is selected the H and V sync.

However, the synchronized signal that is input fi rst is selected.

on G:  Uses a synchronized signal on the Video G signal, which is input from the G connector.

Press to select the “Sync”.

Press to adjust.