Panasonic PTLZ370E Operating Guide

In order to make the projection screen rectangle, place the projector on a flat surface with its front surface parallel 

to the screen. If the screen is tilted lower, extend the adjustable feet and adjust the angle to make a rectangle 

screen. If the projector is tilted horizontally, also use the adjustable feet and adjust the angle to keep the projector 

flat. The adjustable feet can be extended by turning it as shown in the figure, and it is retracted by turning it in the 

reverse direction.

Adjustable range
Adjustable feet: 16 mm (5/8")

 

z

Heated air is expelled from the air exhaust port. Do not touch the air exhaust port directly when adjusting the 

adjustable feet. (



 page 20)

 

z

Tighten the adjustable feet until you hear them click into place.

If the projector is not positioned right in front of the center of the screen, you can adjust the projected image 

position using the lens shift function.

▶

■Adjusting the lens shift

▶

z

Refer to “Removing the lens shift cover” (



 page 20) for how to remove the lens shift cover.