Panasonic PT-DZ770E Operating Guide
[PICTURE] menu
48 - ENGLISH
Settings
[COLOR]
You can adjust the color saturation of the projected
image.
1) Press ▲▼ to select [COLOR].
2) Press ◀▶ or the <ENTER> button.
2) Press ◀▶ or the <ENTER> button.
▶
z
The
[COLOR] individual adjustment screen is
displayed.
3) Press ◀▶ to adjust the level.
Operation
Adjustment
Range
Press ▶ .
Deepens colors.
Maximum
value +31
Press ◀ .
Weakens colors.
Minimum
value –31
[TINT]
You can adjust the skin tone in the projected image.
1) Press ▲▼ to select [TINT].
2) Press ◀▶ or the <ENTER> button.
2) Press ◀▶ or the <ENTER> button.
▶
z
The
[TINT] individual adjustment screen is
displayed.
3) Press ◀▶ to adjust the level.
Operation
Adjustment
Range
Press ▶ .
Adjusts skin tone
toward greenish
color.
Maximum
value +31
Press ◀ .
Adjusts skin tone
toward reddish
purple.
Minimum
value –31
[COLOR TEMPERATURE]
You can switch the color temperature if the white
areas of the projected image are bluish or reddish.
1) Press ▲▼ to select [COLOR
TEMPERATURE].
2) Press ◀▶ or the <ENTER> button.
▶
z
The
[COLOR TEMPERATURE] individual
adjustment screen is displayed.
3) Press ◀▶ to switch [COLOR
TEMPERATURE].
▶
z
The setting will change as follows each time
you press the button.
[DEFAULT]
[USER]
[HIGH]
[MIDDLE]
Note
z
When [COLOR MATCHING] (
page 58)
adjustment is set to other than [OFF], [COLOR
TEMPERATURE] is fixed to [USER].
▶
■To adjust desired white balance
4) Select [USER] in Step 3).
5) Press the <ENTER> button.
5) Press the <ENTER> button.
▶
z
The
[COLOR TEMPERATURE] screen is
displayed.
6) Press ▲▼ to select [WHITE
BALANCE].
7) Press the <ENTER> button.
▶
z
The
[WHITE BALANCE] screen is displayed.
8) Press ▲▼ to select [WHITE BALANCE
HIGH] or [WHITE BALANCE LOW].
9) Press the <ENTER> button.
▶
z
The
[WHITE BALANCE HIGH] screen or the
[WHITE BALANCE LOW] screen is displayed.
10) Press ▲▼ to select [RED][GREEN]
[BLUE].
11) Press ◀▶ to adjust the level.
Item
Operation
Adjustment
Range
[RED]
Press ▶ .
Deepens
red.
Maximum
value
High: 255
Low: 63
Press ◀ .
Weakens
red.
[GREEN]
Press ▶ .
Deepens
green.
Minimum
value
High: 0
Low: 0
Press ◀ .
Weakens
green.
[BLUE]
Press ▶ .
Deepens
blue.
Default
High: 255
Low: 32
Press ◀ .
Weakens
blue.
Note
z
Adjust [COLOR TEMPERATURE] correctly. All
colors will not be displayed properly unless adequate
adjustment is made. If the adjustment does not look
suitable, you can press the <DEFAULT> button
on the remote control to return the setting for the
selected item only to the factory default setting.
z
The setting of [COLOR TEMPERATURE] is not
reflected in internal test patterns (
page 75).
Make sure to set [COLOR TEMPERATURE] while
projecting input signal.
▶
■To change the [USER] name
4) Select [USER] in Step 3).
5) Press the <ENTER> button.
5) Press the <ENTER> button.
▶
z
The
[COLOR TEMPERATURE] screen is
displayed.
6) Press ▲▼ to select [COLOR
TEMPERATURE NAME CHANGE].