Panasonic TH-47LFP30W Operating Guide

A

Line up and push together connectors A and B 

so they are tight and then twist C until A and B 

cannot be pulled apart. 

Unscrew C and pull connector A and B apart.

When disconnecting the AC cord, be 

absolutely sure to disconnect the AC 

cord plug at the socket outlet first.

B

C

A

B

C

•  After connection, check the cable is pulled out along the groove without overlapping, then tighten the all 12 screws 

to attach the terminal cover correctly. Otherwise water enters inside and causes fi re, electric shock and product 
damage.

•  Water-proof washer is used for one screw with   marked. To attach the terminal cover, let the water-proof washer 

through to attach the   marked screw. 

• Make sure to read the “Terminal cover” (page iii) section for the correct handling of the terminal cover to use the 

product properly. 

To remove the terminal cover to connect a cable or other item, remove all 12 screws in bottom, middle, then top order 
to prevent the terminal cover dropping off. Opening the terminal cover with some screws left on damages the terminal 
cover.

Remove the screws (12) to 
take out the terminal cover.