Panasonic TH-47LFP30W Operating Guide
25
Picture Adjustments
Notes:
• “Colour” setting can be adjusted for Video
• “Colour” setting can be adjusted for Video
input signal.
• You can change the level of each function
(Backlight, Contrast, Brightness, Colour, Tint,
Sharpness) for each Picture Mode.
Sharpness) for each Picture Mode.
• The setting details for normal, dynamic
and cinema respectively are memorized
separately for each input terminal.
separately for each input terminal.
• The “Tint” setting can be adjusted for NTSC
signal only during Video input signal.
• In Contrast, there is not a noticeable change
even when contrast is increased with a bright
picture or reduced with a dark picture.
picture or reduced with a dark picture.
Advanced settings
On the remote control unit, while the “Advanced settings” menu is displayed, if either the N button is pressed at any time or
the ACTION ( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.
the ACTION ( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.
Helpful Hint ( /
Normalise
Normalisation)
Item
Effect Adjustments
Backlight
Darker
Brighter
Adjusts luminance of the back
light.
light.
Contrast
Less
More
Selects the proper brightness
and density for the room.
and density for the room.
Brightness
Darker
Brighter
Adjusts for easier viewing of
dark pictures such as night
scenes and black hair.
dark pictures such as night
scenes and black hair.
Colour
Less
More
Adjusts colour saturation.
Tint
Reddish
Greenish
Adjusts for nice skin colour.
Sharpness
Less
More
Adjusts picture sharpness.
Notes:
• Carry out “W/B” adjustment as follows.
• Carry out “W/B” adjustment as follows.
1. Adjust the white balance of the bright sections using the “W/B High R”, “W/B High G” and “W/B High B” settings.
2. Adjust the white balance of the dark sections using the “W/B Low R”, “W/B Low G” and “W/B Low B” settings.
3. Repeat steps 1 and 2 to adjust.
2. Adjust the white balance of the dark sections using the “W/B Low R”, “W/B Low G” and “W/B Low B” settings.
3. Repeat steps 1 and 2 to adjust.
Steps 1 and 2 affect each other’s settings, so repeat each step in turn to make the adjustment.
• The adjustment values are memorized separately for each input terminal.
• The adjustment range values should be used as an adjustment reference.
• The adjustment values are memorized separately for each input terminal.
• The adjustment range values should be used as an adjustment reference.
Item
Effect Details
Input level
Less
More
Adjustment of parts which are extremely bright and hard to see.
Gamma
Down
Up
S Curve
2.0
2.2
2.6
AGC
Off
On
Increases the brightness of dark signal automatically.
W/B High
R
Less
More
Adjusts the white balance for light red areas.
W/B High
G
Less
More
Adjusts the white balance for light green areas.
W/B High
B
Less
More
Adjusts the white balance for light blue areas.
W/B Low R
Less
More
Adjusts the white balance for dark red areas.
W/B Low G
Less
More
Adjusts the white balance for dark green areas.
W/B Low B
Less
More
Adjusts the white balance for dark blue areas.