Panasonic mc-e470 Operating Guide
10
E) SERVICING AND REPAIRS
We always recommend the use of genuine Panasonic replacement parts.
To replace any of the following parts, place the cleaner in the horizontal position by using the pedal and turn it over exposing the
underside.
underside.
CAUTION: Before replacing any part DISCONNECT THE CLEANER FROM THE MAINS SUPPLY.
Release the belt from the motor shaft and
lift the beater bar assembly to remove the
belt.
lift the beater bar assembly to remove the
belt.
To re-assemble, place the belt around
the motor shaft and around the beater
bar pulley.
Insert the beater bar mounts into their
housings, then turn the beater bar by
hand to ensure that the belt has been
seated correctly.
the motor shaft and around the beater
bar pulley.
Insert the beater bar mounts into their
housings, then turn the beater bar by
hand to ensure that the belt has been
seated correctly.
IMPORTANT: On model MC-E470E,
when installing the belt, make sure
it is placed between the screw and
the inside cover rib, as indicated.
when installing the belt, make sure
it is placed between the screw and
the inside cover rib, as indicated.
Re-fit the base plate and replace the
screws.
screws.
Remove the 4 screws from the base
plate and lift it off.
plate and lift it off.
1
2
3
How to replace - Drive belt (Type UB-1L) / Beater bar assembly
MC-E470E only
Screw
Cover
rib