Panasonic DMC-LX100 Operating Guide

Page of 2
Using [4K PHOTO] in the [Motion Picture] menu, you can easily create still pictures of approximately 
8 million pixels with an aspect ratio of [4:3], [3:2], [16:9] or [1:1]. Like taking pictures at a high burst 
speed, you can create still pictures that capture the moments.
1
Recording motion pictures in 4K
2
Creating Still Pictures from a Motion Picture
Press the cursor button 
 to pause motion picture playback 
at the point where you want to capture a picture.
If you press the cursur botton 
 
/
 during a pause, you can rewind or forward 
the motion picture.
If you press the cursor buttons 
 
/
 after pressing [Fn2], you can skip to the 
markers you set during motion picture recording. To return to normal playback 
operations, press [Fn2] again.
Press [MENU/SET].
Confi rmation screen is displayed. It is executed when [Yes] is selected.
 
Created still pictures will be saved with recording information, such as shutter speed, aperture, and ISO sensitivity.
 
To create still pictures from motion pictures when the camera is connected to a TV with an HDMI micro cable, 
 
set [VIERA Link] in [TV Connection] in the [Setup] menu to [OFF].
Even if you insert the card to a 4K-compatible TV with an SD card slot, you cannot play back motion pictures 
 
recorded with the motion picture aspect ratio set to an option other than [16:9]. To play back those motion 
pictures, connect the camera and a 4K-compatible TV with an HDMI micro cable.
When recording motion pictures in 4K, use a card rated as UHS Speed Class 3.
 
For details on the operation of each step or how to set each menu option, refer to the “Operating Instructions
for advanced features” (PDF format).
6DYH
Fn2
Creating still pictures from 
4K motion pictures
ENGLISH
DEUTSCH
Mit [4K Foto] im Menü [Video] können Sie einfach Standbilder mit ca. 8 Millionen Pixeln in einem 
Bildseitenverhältnis von [4:3], [3:2], [16:9] oder [1:1] erstellen. Wie beim Aufnehmen von Fotos mit 
hoher Serienbildgeschwindigkeit können Sie Bilder erstellen, die Augenblicke erfassen.
Für Details zum Vorgang der jeweiligen Schritte oder zur Einstellung der Menüoptionen, siehe 
“Bedienungsanleitung für erweiterte Funktionen” (PDF-Format).
2
Fotos von einem Video erstellen
Drücken Sie die Cursortaste 
, um die  Videowiedergabe an 
der Stelle, an der Sie ein Bild erfassen möchten, anzuhalten.
Wenn Sie die Cursortaste 
 
/
 während einer Pause drücken, können Sie das 
Video zurückspulen oder vorwärts bewegen.
Wenn Sie die Cursor-Tasten 
 
/
 nach dem Drücken von [Fn2] drücken, können Sie 
zu den Markern springen, die Sie während der Videoaufnahme eingestellt haben. Um 
zu den normalen Wiedergabefunktionen zurückzukehren, drücken Sie erneut [Fn2].
Drücken Sie [MENU/SET].
Der Bestätigungsbildschirm wird angezeigt. Bei Auswahl von [Ja] wird der Vorgang ausgeführt.
 
Erstellte Standbilder werden mit Aufnahmeinformationen wie Verschlusszeit, Blendenwert und ISO-
 
Empfi ndlichkeit gespeichert.
Um Bilder von Videos zu erstellen wenn die Kamera an ein Fernsehgerät über ein HDMI-Mikro-Kabel 
 
angeschlossen ist, stellen Sie [VIERA Link] in [TV-Anschluss] im [Setup]-Menü auf [OFF].
Auch wenn Sie die Karte in ein zu 4K kompatibles TV-Gerät mit SD-Kartensteckplatz einsetzen, können 
 
Sie Videos nicht wiedergeben, die mit einer anderen eingestellten Bildseitenverhältnis-Option als [16:9] 
aufgenommen wurden. Um diese Videos wiederzugeben, schließen Sie die Kamera mit einem HDMI-Mikro-
Kabel an ein zu 4K kompatibles TV-Gerät an.
6SFK
Fn2
Fotos von 4K-Videos erstellen
1
Aufnahme von Bildern in 4K
Verwenden Sie für die Aufnahme von Videos in 4K eine Karte der UHS-Geschwindigkeitsklasse 3.
 
Wählen Sie [4K Foto] im Menü [Video] und stellen Sie es auf [ON].
Es wird ein Bestätigungsbildschirm angezeigt. Wählen Sie [Ja].
 
Die Kamera wird auf einen Videomodus gestellt, der sich zur Erfassung von 
 
Standbildern aus 4K-Videos eignet, und Ihnen die Aufnahme von Videos mit einer 
Bildqualität für Standbilder ermöglicht. 
Die folgenden Einstellungen werden fest eingestellt:
 
[Aufnahmeformat]
[MP4]
[Aufn.-Qual.]
[4K/100M/25p]
Die Kamera führt Auto-Fokus und andere automatische Vorgänge während der Videoaufnahme schneller 
 
als gewöhnlich aus.
Verlassen Sie das Menü nach der Einstellung.
 
Aufnehmen eines Videos.
Drücken Sie die Videotaste oder den Auslöser, um die Videoaufnahme zu starten.
 
Drücken Sie die Videotaste oder den Auslöser erneut, um die Videoaufnahme zu stoppen.
 
Sie können während der Aufnahme Marker zu einem Video hinzufügen, indem Sie [Fn2] 
 
drücken. Wenn Sie Standbilder aus einem Video aufnehmen, können Sie durch das Hinzufügen 
von Markern zu den Punkten springen, an denen Sie Standbilder aufnehmen möchten.
Der Bildwinkel von Videos in 4K ist enger als der Bildwinkel von Videos in anderen Größen.
 
Wählen Sie das gewünschte Bildseitenverhältnis
Sie können das Bildseitenverhältnis von zu erstellenden Standbildern einstellen, indem Sie das 
 
Bildseitenverhältnis für Videos mit dem Bildseitenverhältnis-Wahlschalter einrichten.
Aufnahme von sich schnell bewegenden Motiven ohne Bewegungsunschärfe
Bedienen Sie den Verschlusszeit-Schalter, um die Verschlusszeit zu verkürzen.
 
Ungefähre Verschlusszeit für Aufnahme im Freien bei guten Wetterbedingungen: 1/2000 Sekunden oder schneller
 
FRANÇAIS
En utilisant [PHOTO 4K] dans le menu [Image animée], vous pouvez facilement créer des photos d’environ 
8 millions de pixels avec un format de [4:3], [3:2], [16:9] ou [1:1]. Comme si vous preniez des photos avec 
une vitesse de rafale rapide, vous pouvez créer des images fi xes pour saisir certains instants.
Pour avoir des détails sur chaque commande de l’étape ou sur la manière de paramétrer chaque option du 
menu, consultez le “Mode d’emploi des caractéristiques avancées” (format PDF).
2
Création de photos à partir d’un fi lm
Appuyez sur 
  de la touche curseur pour mettre en pause la 
lecture du fi lm à l’endroit où vous désirez capturer une photo.
Si vous appuyez sur 
 
/
 de la touche curseur durant une pause, vous pouvez 
faire défi ler le fi lm vers l’arrière ou l’avant.
Si vous appuyez sur les touches du curseur 
 
/
 après avoir appuyé sur [Fn2], vous 
pouvez sauter sur les marqueurs que vous avez défi nis durant l’enregistrement du fi lm. 
Pour revenir sur les commandes normales de lecture, appuyez de nouveau sur [Fn2].
Appuyez sur [MENU/SET].
L’écran de confi rmation s’affi che. Cela s’effectue lorsque [Oui] est sélectionné.
 
Les photos créées seront sauvegardées avec des informations d’enregistrement, comme la vitesse 
 
d’obturation, l’ouverture, et la sensibilité ISO.
Pour créer des photos à partir d’un fi lm lorsque l’appareil photo est raccordé à un téléviseur à l’aide d’un micro-
 
câble HDMI, paramétrez [VIERA link] dans [Connexion TV] du menu [Confi g.] sur [NON].
Même si vous introduisez la carte dans le logement pour carte SD d’un téléviseur compatible 4K, vous ne 
 
pouvez pas lire un fi lm enregistré avec un format autre que [16:9]. Pour lire ces fi lms, raccordez l’appareil photo 
et le téléviseur compatible 4K à l’aide d’un micro-câble HDMI.
0«P
Fn2
Création de photos à partir 
d’un fi lm en 4K
1
Enregistrement d’un fi lm en 4K
Sélectionnez [PHOTO 4K] dans le menu [Image animée], et 
paramétrez-le sur [OUI].
Une fenêtre de confi rmation s’affi chera. Sélectionnez [Oui]. 
 
L’appareil photo sera paramétré sur un Mode Film adapté à la capture des photos à partir 
 
d’un fi lm 4K, vous permettant d’enregistrer un fi lm avec une qualité d’image pour photos. 
Les paramètres suivants seront fi xés :
 
[Format enregistrement] [MP4]
[Qualité enr.]
[4K/100M/25p]
L’appareil photo effectue la Mise au point Automatique et les autres commandes automatiques plus 
 
rapidement que d’habitude durant l’enregistrement d’un fi lm.
Quittez le menu une fois celui-ci confi guré.
 
Enregistrez un fi lm.
Appuyez sur la touche fi lm ou le déclencheur pour démarrer l’enregistrement d’un fi lm.
 
Appuyez de nouveau sur la touche fi lm ou le déclencheur pour arrêter l enregistrement d’un fi lm.
 
Vous pouvez ajouter des marqueurs à un fi lm en appuyant sur [Fn2] durant 
 
l’enregistrement. Ajouter des marqueurs vous permet de sauter sur les points où vous 
voulez capturer des photos lorsque vous désirez en créer à partir d’un fi lm.
L’angle de vue des fi lms en 4K est plus étroit que celui des fi lms ayant une autre taille.
 
Sélection du format désiré
Vous pouvez défi nir le format des photos à créer en paramétrant le format du fi lm à l’aide du sélecteur de format.
 
Enregistrement de sujets se déplaçant rapidement sans fl ou de déplacement
Actionnez la molette de la vitesse d’obturation pour augmenter la vitesse d’obturation.
 
Vitesse d’obturation approximative pour un enregistrement en extérieur par beau temps : 
 
1/2000 secondes ou plus
Pour enregistrer des fi lms en 4K, utilisez une carte classée comme UHS Classe de vitesse 
 
3.
ITALIANO
Usando [FOTO 4K] nel menu [Imm. in mov.], è possibile ottenere facilmente foto con circa 8 milioni 
di pixel ed un formato [4:3], [3:2], [16:9] o [1:1]. Come quando si scattano foto a raffi ca, è possibile 
creare foto che catturano i momenti più interessanti.
1
Registrazione di video in 4K
2
Creazione di foto da un video
Selezionare [FOTO 4K] nel menu [Imm. in mov.] ed impostarlo 
su [ON].
Apparirà una schermata di conferma. Selezionare [Sì].
 
La fotocamera verrà impostata su una modalità video adatta ad ottenere foto da video 
 
4K, consentendo di registrare video con una qualità dell’immagine adatta alle foto. 
Verranno impostati i seguenti valori:
 
[Formato Rec]
[MP4]
[Qualità reg.]
[4K/100M/25p]
La fotocamera effettua la messa a fuoco automatica ed altre operazioni automatiche in modo più veloce del 
 
solito durante la registrazione di video.
Uscire dal menu una volta effettuata l’impostazione.
 
Registrare un video.
Premere il pulsante video o il pulsante di scatto dell’otturatore per iniziare la registrazione 
 
di un video.
Premere nuovamente il pulsante video o il pulsante di scatto dell’otturatore per arrestare la 
 
registrazione di un video.
È possibile aggiungere dei marcatori ad un video premendo [Fn2] durante la registrazione. 
 
Aggiungere marcatori consente di saltare ai punti dove si desiderano catturare foto da un video.
L’angolo di visualizzazione dei video in 4K è più stretto di quello dei video in altre dimensioni.
 
Selezione del formato desiderato
È possibile impostare il formato delle foto selezionando il formato dei video con il selettore del formato.
 
Registrazione di soggetti in movimento veloce senza che risultino sfuocati
Ruotare il selettore della velocità dell’otturatore per aumentarla.
 
Velocità dell’otturatore approssimata per riprese all’aperto in buone condizioni meteo: 1/2000 di secondo 
 
o più veloce
Premere il pulsante cursore 
 per mettere in pausa la 
riproduzione nel punto in cui si vuole catturare una foto.
Se si preme il pulsante cursore 
 
/
 durante una pausa, è possibile tornare 
indietro o andare avanti nel video.
Se si premono i pulsanti cursore 
 
/
 dopo aver premuto [Fn2], è possibile 
saltare ai marcatori impostati durante la registrazione dei video. Per ritornare alle 
normali operazioni di riproduzione, premere nuovamente [Fn2].
Premere [MENU/SET].
Verrà visualizzata una schermata di conferma. L’operazione verrà eseguita quando si seleziona [Sì].
 
Le foto ottenute verranno salvate con informazioni di registrazione, come la velocità dell’otturatore, 
 
l’apertura, e la sensibilità ISO.
Per creare foto da video quando la videocamera è collegata ad un televisore con un cavo micro HDMI, 
 
impostare [VIERA Link] in [Collegamento TV] nel menu [Setup] su [OFF].
Anche se si inserisce la scheda su una TV compatibile 4K con un lettore di schede SD, non è possibile 
 
riprodurre i video registrati con formato diverso da [16:9]. Per riprodurre quei video, collegare la fotocamera ad 
una TV compatibile 4K con un cavo micro HDMI.
Quando si registrano video in 4K, usare una scheda UHS Speed Class 3.
 
Per maggiori informazioni sui singoli passaggi o su come impostare ciascuna opzione di menu, fare riferimento 
a “Istruzioni d’uso per le funzioni avanzate” (formato PDF).
6DOYD
Fn2
Creazione di foto da video 4K
SQC0129
Digital Camera
Model No. DMC-LX100
Appareil photo numérique
Modèle n° DMC-LX100
Fotocamera digitale
Modello N. DMC-LX100
Digital-Kamera
Model Nr. DMC-LX100
Select [4K PHOTO] in the [Motion Picture] menu, and set it to [ON].
A confi rmation screen will be displayed. Select [Yes].
 
The camera will be set to a motion picture mode suitable for capturing still 
 
pictures from 4K motion pictures, allowing you to record motion pictures with a 
picture quality for still pictures. 
The following settings will be fi xed:
 
[Rec Format]
[MP4]
[Rec Quality]
[4K/100M/25p]
The camera performs Auto Focus and other automatic operations faster than usual during motion picture recording.
 
Exit the menu after it is set.
 
Record a motion picture.
Press the motion picture button or the shutter button to start recording a motion picture.
 
Press the motion picture button or the shutter button again to stop recording a motion picture.
 
You can add markers to a motion picture by pressing [Fn2] during recording. Adding 
 
markers allows you to skip to the points where you want to capture still pictures when 
creating still pictures from a motion picture.
The angle of view of motion pictures in 4K is narrower than those of motion pictures in other sizes.
 
Selecting the desired aspect ratio
You can set the aspect ratio of still pictures to be created by setting the motion picture aspect ratio with the 
 
aspect ratio selector switch.
Recording fast-moving subjects without motion blur
Operate the shutter speed dial to increase the shutter speed.
 
Approximate shutter speed for outdoor recording in fi ne weather conditions: 1/2000 seconds or faster
 
EG_EF_EB_SQC0129.indd   1
EG_EF_EB_SQC0129.indd   1
2014/09/09   18:00:47
2014/09/09   18:00:47