Panasonic PTLC70U Operating Guide
42
Previousscreen
When projecting an image other than a video signal, it can
simultaneously adjust such elements as the picture vertical
position, horizontal position, dot clock and phase. Operate as
follows to use this function.
simultaneously adjust such elements as the picture vertical
position, horizontal position, dot clock and phase. Operate as
follows to use this function.
AUTO SETUP
Press the AUTO SETUP Button
on the remote control unit.
on the remote control unit.
The words “Auto Setup” appear on
the screen and the automatic
adjustment begins.
The adjustment is complete when
the “Auto Setup” display disappears.
the screen and the automatic
adjustment begins.
The adjustment is complete when
the “Auto Setup” display disappears.
Using the Auto Setup Feature
A u t o S e t u p
Note
• If normal picture can not be attained during RGB signal input or
DTV format signal input, please press the AUTO SETUP Button
on the remote control.
on the remote control.
• The LCD Projector detects whether the simple stand is
down or up and automatically corrects keystone distortion.
• Adjusted settings are saved as is even if power is turned
off.
• If the edges of the projected picture are indistinct, or if a
dark picture is being projected, the automatic set up
processing may stop automatically before it is complete. If
this happens, project a different picture and then press the
AUTO SETUP Button once more. Or, perform the following
operations as indicated in the on-screen display.
Refer to the “
processing may stop automatically before it is complete. If
this happens, project a different picture and then press the
AUTO SETUP Button once more. Or, perform the following
operations as indicated in the on-screen display.
Refer to the “
”.
Refer to the
”.
(Remote
Control unit)