Panasonic PTD7600E Operating Guide

12

Side-mounted 
connection terminals 
(page 14)

AC IN terminal (page 35)
Connect the supplied line power cord into this
receptacle.
Do not connect any other cable to this socket.

MAIN POWER switch (page 35)
Use this switch to turn on “I” and off “

o

” the

commercial line power applied to the projector.

Burglar lock
Attach a commercial burglar prevention cable (e.g.
from Kensington) to this lock port. It is compatible
with the Micro Saver Security System from
Kensington. This security lock is compatible with
the Microsaver Security System from Kensington.
Contact details for this company are given below.
Kensington Technology Group ACCO Brands Inc.
2885 Campus Drive San Mateo, CA 94403
Tel (650)572-2700
Fax (650)572-9675
http://www.kensington.com/
http://www.gravis.com/

Level-adjusting feet (page 18)
Use these feet to adjust the tilt of the projector.
(Leveling feet are provided at the front and rear,
right and left.)

This window receives the signal beam emitted from
the remote control.

Projection lens (optional)
Lens for projecting images on the screen.

Power indicator lamp (page 35)
The lamp lights in red when the MAIN POWER
switch is turned to “I” (on). It turns to green when
the “I” button of the remote control or the main unit
is pressed.

LAMP1 monitor (page 91)
This lamp lights up when the time to replace lamp
unit 1 is reached. It also blinks if something
unusual occurs in the lamp circuit.

LAMP2 monitor (page 91)
This lamp lights up when the time to replace lamp
unit 2 is reached. It also blinks if something
unusual occurs in the lamp circuit.

Temperature monitor (TEMP) (page 91)
Lighting or blinking of this lamp indicates an
abnormal condition of the internal temperature.

Projection lens cover lock button
This button toggles between lock and unlock of the
detachable cover for the projection lens (optional).
Use this for locating the projectors when stacking
two units.