Panasonic PTD7600E Operating Guide

Adjusting the position

POSITION
SHIFT
SIZE

DEFAULT

BLANKING
CLOCK PHASE

INPUT RESOLUTION
CLAMP POSITION
KEYSTONE
EDGE BLENDING

:MENU SELECT
:ADJUST

Press the “MENU” button.

The MAIN MENU screen will be displayed.

Select the “POSITION” with the
buttons.

MAIN MENU
PICTURE
POSITION
LANGUAGE
OPTION
TEST PATTERN
SIGNAL LIST

:MENU SELECT
ENTER:SUB MENU

Press the “ENTER” button.

The POSITION screen will be displayed.

Select “CLOCK PHASE” with the
buttons.

Adjust the clock phase with the
buttons.

The value changes from 0 to 31.

• No optimal value may be obtained if the output of the PC to which the signal input is applied is

unstable.

• No optimal value may be obtained if the total number of dots is not correct.
• The clock phase can be adjusted only when RGB signal input is applied with RGB1, RGB2 IN, and the

analog input module (optional: ET-MD95RGB).

Note

Clock phase adjustment

Clock phase adjustment achieves the best image when the screen flickers or halo is observed around the contour.

Procedure of adjustment