Panasonic PTD7600E Operating Guide
Optional settings
70
System information
Displays the system information of the projector.
Video setting
This feature allows the user to select the signaling
system according to the connected device.
system according to the connected device.
Select “VIDEO SETTING” from the
“OPTION” screen and press the ENTER
button.
“OPTION” screen and press the ENTER
button.
A computer screen of “VIDEO SYSTEM” appears.
Use
the or buttons
to
select
“AUTO 1” or “AUTO 2”.
• Pressing the “ENTER” button will move on to the next
page.
Automatic adjustment
(Only for RGB input)
Use this setting when adjusting a specific or oblong
(16:9, etc.) signal.
(16:9, etc.) signal.
Press the MENU button.
The MAIN MENU screen will be displayed.
Select “OPTION” with the
buttons.
buttons.
Press the ENTER button.
The OPTION screen will be displayed.
Using the
buttons, select “AUTO
SETUP”.
Press the
buttons.
The AUTO SETUP screen will be displayed.
Using the
buttons, switch to the
desired mode.
“STANDARD”:
to receive signals of which
image aspect is 4:3 or 5:4
image aspect is 4:3 or 5:4
“WIDE”:
to receive signals of which
image aspect is 16:9 (oblong)
image aspect is 16:9 (oblong)
“USER”:
to receive signals of specific
horizontal resolution (number of
horizontally displayed dots)
horizontal resolution (number of
horizontally displayed dots)
Mode
STANDARD
WIDE
Applicable resolution
640 x 400, 640 x 480, 800 x 600, 832 x
624, 960 x 720, 1 024 x 768, 1 152 x 864,
1 152 x 870, 1 280 x 960, 1 280 x 1 024,
1 600 x 1 200
624, 960 x 720, 1 024 x 768, 1 152 x 864,
1 152 x 870, 1 280 x 960, 1 280 x 1 024,
1 600 x 1 200
720 x 400, 848 x 480, 1 280 x 720,
1 120 x 750, 1 376 x 768, 1 600 x 1 024
1 120 x 750, 1 376 x 768, 1 600 x 1 024
SYSTEM INFORMATION
ROM VIRSION:
ROM VIRSION:
1.00
SET RUNTIME:
14h
LAMP1 RUNTIME:
13h
LAMP2 RUNTIME:
13h
INPUT BOARD:
NOT YET
NUMBER OF
ENTRY SIGNAL:
ENTRY SIGNAL:
4/96
ENTER: NEXT
VIDEO SYSTEM
VIDEO
S-VIDEO
VIDEO
S-VIDEO
AUTO 1
AUTO 1
AUTO 1
AUTO 2
AUTO 2
AUTO 2
SYSTEM INFORMATION
ROM VERSION:
ROM VERSION:
1.00
ON COUNT
POWER ON TIMES:
55
LAMP 1 ON:
57( 0)
LAMP 2 ON:
59( 0)
AUX:
NOT YET
NUMBER OF
ENTRY SIGNAL:
ENTRY SIGNAL:
4/96
ENTER: NEXT
Fan control
When using the projector over 1 400 m above sea
level, set to “HIGH”.
level, set to “HIGH”.
FAN CONTROL
NORMAL
HIGH
Note
• When ET-MD95VM2 (optional) is
mounted, an item of “VIDEO SELECT” will
appear on the “VIDEO SETTING” screen
allowing the used to select either “LINE or
Y/C” or “YC
appear on the “VIDEO SETTING” screen
allowing the used to select either “LINE or
Y/C” or “YC
b
C
r
”.
“AUTO1”: The system is automatically selected from
among NTSC, PAL, SECAM, NTSC4.43 and
PAL60.
PAL60.
“AUTO2”: The system is automatically selected from
among NTSC, PAL-M and PAL-N.
If “USER” is selected, enter the
horizontal resolution of signal source
into “number of horizontally displayed
dots” using
horizontal resolution of signal source
into “number of horizontally displayed
dots” using
buttons.
Press the ENTER button.
Execute automatic adjustment.
A message “EXECUTING...” appears during
automatic adjustment.
When the adjustment is complete, the system
returns to the input screen.
A message “EXECUTING...” appears during
automatic adjustment.
When the adjustment is complete, the system
returns to the input screen.