Panasonic CZRD52CP Operating Guide

Perform the steps below to cancel the timer program for a particular day.

TIMER/CLOCK

MODE

OFF/ON

CANCEL

CLOCK

SET

SELECT

UP

DOWN

4

2

1 , 3

1. Press 

SELECT

 to enter day.

2. Press Timer 

UP

 or 

DOWN

 until your desired day is shown.

3. Press 

SELECT

 to enter program setting.

4. Press Timer 

UP

 or 

DOWN

 until your desired day is shown.

Press 

CANCEL

 to cancel the program, 

 will disappear.

A - Monday to Friday: Unit ON at 09:00 with 20°C (program 1) & unit OFF at 18:30 (program 2).

B - Only Wednesday: Add timer to turn OFF the unit at 12:30 (program 3) and turn ON the unit at 13:30 

(program 4).

■ To set A (Monday to Friday – Collective day setting)

To set the time, please refer to steps 1 to 7 of “Day and Timer Set Up Method” on page 7.

Program 1 – select ON, set desired time to 9:00 and desired temperature to 20°C.

Program 2 – select OFF and set desired time to 18:30.
Program 3 ~ 6 – no timer program set, press 

MODE

 or wait 30 seconds to exit weekly timer.

■ To set B (Wednesday – add new timer program)

1. Press Timer 

MODE

 to enter timer mode.

2. Press Timer 

SELECT

 to enter day setting.  

3. Press Timer 

UP

 or 

DOWN

 until “WED” is selected, press 

SELECT

 to con rm your selection.

4. Perform steps 4 to 7 of “Day and Timer Set Up Method” to add program 3 and program 4.

Note: Timer that has setting nearest to the current time and day will be activated first.

•  To disable weekly timer setting, press 

MODE

, then press 

CANCEL

.

•  To enable previous weekly timer setting, press 

MODE

, then press 

SET

.

•  The unit stops and operation LED OFF.

•  OFF indicator does not shown on remote control display.

When abnormality occurs, use remote control to retrieve error code.

OFF / ON

TIMER/CLOCK

FAN SPEED

MODE

CHECK

AIR SWING

OFF/ON

CANCEL

CLOCK

SET

SELECT

UP

DOWN

OFF

Indicator

1 , 3

2

Operation 

LED

Ensure the operation LED is in OFF condition.
1. Press for 5 seconds.
2. Press 

UP

 or 

DOWN

. If error code and abnormality can be 

identi ed, the operation LED  will be ON continuously, then jot 

down the error code.

3. Press for 5 seconds to quit checking.

4. Reveal the error code to authorized dealer.

OSTH0901-01

-  You can set the Timer for each day of the week (Monday to Sunday) with 6 programs per day.

-  ON Timer can be set together with your desired temperature and this temperature will be used 

continuously.

-  Same timer program cannot be set in the same day.

-  You may also select collective days with same timer setting.

-  Promotes energy saving by allowing you to set up to 6 programs in any given day.

MODE

UP

DOWN

SELECT

SELECT

OFF/ON

UP

DOWN

TEMP

SET

•  After 2 seconds, the display will move to the next program. Repeat steps 4 to 7 to set programs 2 to 6. 
•  During timer setup, if no button is pressed within 30 seconds, or if the 

SET

 button is pressed, the setting at 

that moment is con rmed and timer setup is ended.       

Perform the steps below to check the timer program for a particular day.
1. Press Timer 

MODE

 to enter timer mode.

2. Press 

SELECT

 to enter day setting.

3. Press Timer 

UP

 or 

DOWN

 until your desired day is shown, press 

SELECT

 to con rm your selection.

4. Press Timer 

UP

 or 

DOWN

 to check the set programs.

1. Press Timer 

MODE

 to enter timer mode.

2. Press 

SELECT

 to enter day setting.

3. Press Timer 

UP

 or 

DOWN

 until your desired day is shown.

4. Perform steps 4 to 7 of “Day and Timer Set Up Method” to modify existing timer program, or add any timer 

program.

-  You can set ON timer only or OFF timer only or both ON and OFF timer in a day.

Press Timer 

MODE

 to change the display to daily timer.

OFF/ON

Example: To turn ON the unit at 09:00
Press Timer 

OFF/ON

 to select ON timer.

Press 

UP

 or 

DOWN

 to select the desired time, then press 

SET

 to con rm the selected time.

Or press 

CANCEL

 if you do not want any setting for ON Timer.

Example: To turn OFF the unit at 18:30
Press Timer 

OFF/ON

 to select OFF timer.

Press 

UP

 or 

DOWN

 to select the desired time, then press 

SET

 to con rm the selected time.

Or press 

CANCEL

 if you do not want any setting for OFF Timer.

Note:

•  When ON timer is set, the unit may start early before the actual set time in order to achieve the 

desired temperature on time.

•  Timer operation is based on the clock set in the remote control and repeats daily once set. 

For clock setting, please refer to Remote Control preparation.

•  The timer closest to the current time will be activated  rst.

•  If timer is cancelled manually or due to power failure, you can restore the previous setting by 

pressing 

SET

.

Final Display of Daily Timer:

TIMER
ON

OFF

TIMER
ON

TIMER

OFF

Only ON Timer is selected.

The unit will automatically

switch ON at 9:00.

Only OFF Timer is selected.

The unit will automatically

switch OFF at 18:30.

Both ON and OFF Timer are

selected.

2 types of Timer mode can be selected on the remote control.

     -   Daily Timer

     -   Weekly Timer

-  Daily timer and weekly timer could not be set at the same time.

-  Select one of these Timers for your convenience.

TIMER/CLOCK

MODE

OFF/ON

CANCEL

CLOCK

SET

SELECT

UP

DOWN

Press

-  Press once to change the display from CLOCK to Timer or vice-versa.
-  Press for more than 4 seconds to change the display from Daily Timer to Weekly Timer or vice-versa.

Lights up if Timer operation is selected

Time to be selected

(10 minutes step)

OFF Timer

To automatically switch “OFF” the unit

ON Timer

To automatically 

switch “ON”

the unit 

ON Timer

To automatically switch “ON” the unit

OFF Timer

To automatically switch “OFF” the unit

Time to be selected

(10 minutes step)

Indicates the selected day

6 different programs can be set

in a day (1 ~ 6)

Lights up if Timer operation is selected

Day to be selected

Indicates the next timer operation day

F566767-OSTH0901-01_1EN.indd   2

1/13/2009   11:06:43 AM

Perform the steps below to cancel the timer program for a particular day.

TIMER/CLOCK

MODE

OFF/ON

CANCEL

CLOCK

SET

SELECT

UP

DOWN

4

2

1 , 3

1. Press 

SELECT

 to enter day.

2. Press Timer 

UP

 or 

DOWN

 until your desired day is shown.

3. Press 

SELECT

 to enter program setting.

4. Press Timer 

UP

 or 

DOWN

 until your desired day is shown.

Press 

CANCEL

 to cancel the program, 

 will disappear.

A - Monday to Friday: Unit ON at 09:00 with 20°C (program 1) & unit OFF at 18:30 (program 2).

B - Only Wednesday: Add timer to turn OFF the unit at 12:30 (program 3) and turn ON the unit at 13:30 

(program 4).

■ To set A (Monday to Friday – Collective day setting)

To set the time, please refer to steps 1 to 7 of “Day and Timer Set Up Method” on page 7.

Program 1 – select ON, set desired time to 9:00 and desired temperature to 20°C.

Program 2 – select OFF and set desired time to 18:30.
Program 3 ~ 6 – no timer program set, press 

MODE

 or wait 30 seconds to exit weekly timer.

■ To set B (Wednesday – add new timer program)

1. Press Timer 

MODE

 to enter timer mode.

2. Press Timer 

SELECT

 to enter day setting.  

3. Press Timer 

UP

 or 

DOWN

 until “WED” is selected, press 

SELECT

 to con rm your selection.

4. Perform steps 4 to 7 of “Day and Timer Set Up Method” to add program 3 and program 4.

Note: Timer that has setting nearest to the current time and day will be activated first.

•  To disable weekly timer setting, press 

MODE

, then press 

CANCEL

.

•  To enable previous weekly timer setting, press 

MODE

, then press 

SET

.

•  The unit stops and operation LED OFF.

•  OFF indicator does not shown on remote control display.

When abnormality occurs, use remote control to retrieve error code.

OFF / ON

TIMER/CLOCK

FAN SPEED

MODE

CHECK

AIR SWING

OFF/ON

CANCEL

CLOCK

SET

SELECT

UP

DOWN

OFF

Indicator

1 , 3

2

Operation 

LED

Ensure the operation LED is in OFF condition.
1. Press for 5 seconds.
2. Press 

UP

 or 

DOWN

. If error code and abnormality can be 

identi ed, the operation LED  will be ON continuously, then jot 

down the error code.

3. Press for 5 seconds to quit checking.

4. Reveal the error code to authorized dealer.

OSTH0901-01

-  You can set the Timer for each day of the week (Monday to Sunday) with 6 programs per day.

-  ON Timer can be set together with your desired temperature and this temperature will be used 

continuously.

-  Same timer program cannot be set in the same day.

-  You may also select collective days with same timer setting.

-  Promotes energy saving by allowing you to set up to 6 programs in any given day.

MODE

UP

DOWN

SELECT

SELECT

OFF/ON

UP

DOWN

TEMP

SET

•  After 2 seconds, the display will move to the next program. Repeat steps 4 to 7 to set programs 2 to 6. 
•  During timer setup, if no button is pressed within 30 seconds, or if the 

SET

 button is pressed, the setting at 

that moment is con rmed and timer setup is ended.       

Perform the steps below to check the timer program for a particular day.
1. Press Timer 

MODE

 to enter timer mode.

2. Press 

SELECT

 to enter day setting.

3. Press Timer 

UP

 or 

DOWN

 until your desired day is shown, press 

SELECT

 to con rm your selection.

4. Press Timer 

UP

 or 

DOWN

 to check the set programs.

1. Press Timer 

MODE

 to enter timer mode.

2. Press 

SELECT

 to enter day setting.

3. Press Timer 

UP

 or 

DOWN

 until your desired day is shown.

4. Perform steps 4 to 7 of “Day and Timer Set Up Method” to modify existing timer program, or add any timer 

program.

-  You can set ON timer only or OFF timer only or both ON and OFF timer in a day.

Press Timer 

MODE

 to change the display to daily timer.

OFF/ON

Example: To turn ON the unit at 09:00
Press Timer 

OFF/ON

 to select ON timer.

Press 

UP

 or 

DOWN

 to select the desired time, then press 

SET

 to con rm the selected time.

Or press 

CANCEL

 if you do not want any setting for ON Timer.

Example: To turn OFF the unit at 18:30
Press Timer 

OFF/ON

 to select OFF timer.

Press 

UP

 or 

DOWN

 to select the desired time, then press 

SET

 to con rm the selected time.

Or press 

CANCEL

 if you do not want any setting for OFF Timer.

Note:

•  When ON timer is set, the unit may start early before the actual set time in order to achieve the 

desired temperature on time.

•  Timer operation is based on the clock set in the remote control and repeats daily once set. 

For clock setting, please refer to Remote Control preparation.

•  The timer closest to the current time will be activated  rst.

•  If timer is cancelled manually or due to power failure, you can restore the previous setting by 

pressing 

SET

.

Final Display of Daily Timer:

TIMER
ON

OFF

TIMER
ON

TIMER

OFF

Only ON Timer is selected.

The unit will automatically

switch ON at 9:00.

Only OFF Timer is selected.

The unit will automatically

switch OFF at 18:30.

Both ON and OFF Timer are

selected.

2 types of Timer mode can be selected on the remote control.

     -   Daily Timer

     -   Weekly Timer

-  Daily timer and weekly timer could not be set at the same time.

-  Select one of these Timers for your convenience.

TIMER/CLOCK

MODE

OFF/ON

CANCEL

CLOCK

SET

SELECT

UP

DOWN

Press

-  Press once to change the display from CLOCK to Timer or vice-versa.
-  Press for more than 4 seconds to change the display from Daily Timer to Weekly Timer or vice-versa.

Lights up if Timer operation is selected

Time to be selected

(10 minutes step)

OFF Timer

To automatically switch “OFF” the unit

ON Timer

To automatically 

switch “ON”

the unit 

ON Timer

To automatically switch “ON” the unit

OFF Timer

To automatically switch “OFF” the unit

Time to be selected

(10 minutes step)

Indicates the selected day

6 different programs can be set

in a day (1 ~ 6)

Lights up if Timer operation is selected

Day to be selected

Indicates the next timer operation day

F566767-OSTH0901-01_1EN.indd   2

1/13/2009   11:06:43 AM

Perform the steps below to cancel the timer program for a particular day.

TIMER/CLOCK

MODE

OFF/ON

CANCEL

CLOCK

SET

SELECT

UP

DOWN

4

2

1 , 3

1. Press 

SELECT

 to enter day.

2. Press Timer 

UP

 or 

DOWN

 until your desired day is shown.

3. Press 

SELECT

 to enter program setting.

4. Press Timer 

UP

 or 

DOWN

 until your desired day is shown.

Press 

CANCEL

 to cancel the program, 

 will disappear.

A - Monday to Friday: Unit ON at 09:00 with 20°C (program 1) & unit OFF at 18:30 (program 2).

B - Only Wednesday: Add timer to turn OFF the unit at 12:30 (program 3) and turn ON the unit at 13:30 

(program 4).

■ To set A (Monday to Friday – Collective day setting)

To set the time, please refer to steps 1 to 7 of “Day and Timer Set Up Method” on page 7.

Program 1 – select ON, set desired time to 9:00 and desired temperature to 20°C.

Program 2 – select OFF and set desired time to 18:30.
Program 3 ~ 6 – no timer program set, press 

MODE

 or wait 30 seconds to exit weekly timer.

■ To set B (Wednesday – add new timer program)

1. Press Timer 

MODE

 to enter timer mode.

2. Press Timer 

SELECT

 to enter day setting.  

3. Press Timer 

UP

 or 

DOWN

 until “WED” is selected, press 

SELECT

 to con rm your selection.

4. Perform steps 4 to 7 of “Day and Timer Set Up Method” to add program 3 and program 4.

Note: Timer that has setting nearest to the current time and day will be activated first.

•  To disable weekly timer setting, press 

MODE

, then press 

CANCEL

.

•  To enable previous weekly timer setting, press 

MODE

, then press 

SET

.

•  The unit stops and operation LED OFF.

•  OFF indicator does not shown on remote control display.

When abnormality occurs, use remote control to retrieve error code.

OFF / ON

TIMER/CLOCK

FAN SPEED

MODE

CHECK

AIR SWING

OFF/ON

CANCEL

CLOCK

SET

SELECT

UP

DOWN

OFF

Indicator

1 , 3

2

Operation 

LED

Ensure the operation LED is in OFF condition.
1. Press for 5 seconds.
2. Press 

UP

 or 

DOWN

. If error code and abnormality can be 

identi ed, the operation LED  will be ON continuously, then jot 

down the error code.

3. Press for 5 seconds to quit checking.

4. Reveal the error code to authorized dealer.

OSTH0901-01

-  You can set the Timer for each day of the week (Monday to Sunday) with 6 programs per day.

-  ON Timer can be set together with your desired temperature and this temperature will be used 

continuously.

-  Same timer program cannot be set in the same day.

-  You may also select collective days with same timer setting.

-  Promotes energy saving by allowing you to set up to 6 programs in any given day.

MODE

UP

DOWN

SELECT

SELECT

OFF/ON

UP

DOWN

TEMP

SET

•  After 2 seconds, the display will move to the next program. Repeat steps 4 to 7 to set programs 2 to 6. 
•  During timer setup, if no button is pressed within 30 seconds, or if the 

SET

 button is pressed, the setting at 

that moment is con rmed and timer setup is ended.       

Perform the steps below to check the timer program for a particular day.
1. Press Timer 

MODE

 to enter timer mode.

2. Press 

SELECT

 to enter day setting.

3. Press Timer 

UP

 or 

DOWN

 until your desired day is shown, press 

SELECT

 to con rm your selection.

4. Press Timer 

UP

 or 

DOWN

 to check the set programs.

1. Press Timer 

MODE

 to enter timer mode.

2. Press 

SELECT

 to enter day setting.

3. Press Timer 

UP

 or 

DOWN

 until your desired day is shown.

4. Perform steps 4 to 7 of “Day and Timer Set Up Method” to modify existing timer program, or add any timer 

program.

-  You can set ON timer only or OFF timer only or both ON and OFF timer in a day.

Press Timer 

MODE

 to change the display to daily timer.

OFF/ON

Example: To turn ON the unit at 09:00
Press Timer 

OFF/ON

 to select ON timer.

Press 

UP

 or 

DOWN

 to select the desired time, then press 

SET

 to con rm the selected time.

Or press 

CANCEL

 if you do not want any setting for ON Timer.

Example: To turn OFF the unit at 18:30
Press Timer 

OFF/ON

 to select OFF timer.

Press 

UP

 or 

DOWN

 to select the desired time, then press 

SET

 to con rm the selected time.

Or press 

CANCEL

 if you do not want any setting for OFF Timer.

Note:

•  When ON timer is set, the unit may start early before the actual set time in order to achieve the 

desired temperature on time.

•  Timer operation is based on the clock set in the remote control and repeats daily once set. 

For clock setting, please refer to Remote Control preparation.

•  The timer closest to the current time will be activated  rst.

•  If timer is cancelled manually or due to power failure, you can restore the previous setting by 

pressing 

SET

.

Final Display of Daily Timer:

TIMER
ON

OFF

TIMER
ON

TIMER

OFF

Only ON Timer is selected.

The unit will automatically

switch ON at 9:00.

Only OFF Timer is selected.

The unit will automatically

switch OFF at 18:30.

Both ON and OFF Timer are

selected.

2 types of Timer mode can be selected on the remote control.

     -   Daily Timer

     -   Weekly Timer

-  Daily timer and weekly timer could not be set at the same time.

-  Select one of these Timers for your convenience.

TIMER/CLOCK

MODE

OFF/ON

CANCEL

CLOCK

SET

SELECT

UP

DOWN

Press

-  Press once to change the display from CLOCK to Timer or vice-versa.
-  Press for more than 4 seconds to change the display from Daily Timer to Weekly Timer or vice-versa.

Lights up if Timer operation is selected

Time to be selected

(10 minutes step)

OFF Timer

To automatically switch “OFF” the unit

ON Timer

To automatically 

switch “ON”

the unit 

ON Timer

To automatically switch “ON” the unit

OFF Timer

To automatically switch “OFF” the unit

Time to be selected

(10 minutes step)

Indicates the selected day

6 different programs can be set

in a day (1 ~ 6)

Lights up if Timer operation is selected

Day to be selected

Indicates the next timer operation day

F566767-OSTH0901-01_1EN.indd   2

1/13/2009   11:06:43 AM

Perform the steps below to cancel the timer program for a particular day.

TIMER/CLOCK

MODE

OFF/ON

CANCEL

CLOCK

SET

SELECT

UP

DOWN

4

2

1 , 3

1. Press 

SELECT

 to enter day.

2. Press Timer 

UP

 or 

DOWN

 until your desired day is shown.

3. Press 

SELECT

 to enter program setting.

4. Press Timer 

UP

 or 

DOWN

 until your desired day is shown.

Press 

CANCEL

 to cancel the program, 

 will disappear.

A - Monday to Friday: Unit ON at 09:00 with 20°C (program 1) & unit OFF at 18:30 (program 2).

B - Only Wednesday: Add timer to turn OFF the unit at 12:30 (program 3) and turn ON the unit at 13:30 

(program 4).

■ To set A (Monday to Friday – Collective day setting)

To set the time, please refer to steps 1 to 7 of “Day and Timer Set Up Method” on page 7.

Program 1 – select ON, set desired time to 9:00 and desired temperature to 20°C.

Program 2 – select OFF and set desired time to 18:30.
Program 3 ~ 6 – no timer program set, press 

MODE

 or wait 30 seconds to exit weekly timer.

■ To set B (Wednesday – add new timer program)

1. Press Timer 

MODE

 to enter timer mode.

2. Press Timer 

SELECT

 to enter day setting.  

3. Press Timer 

UP

 or 

DOWN

 until “WED” is selected, press 

SELECT

 to con rm your selection.

4. Perform steps 4 to 7 of “Day and Timer Set Up Method” to add program 3 and program 4.

Note: Timer that has setting nearest to the current time and day will be activated first.

•  To disable weekly timer setting, press 

MODE

, then press 

CANCEL

.

•  To enable previous weekly timer setting, press 

MODE

, then press 

SET

.

•  The unit stops and operation LED OFF.

•  OFF indicator does not shown on remote control display.

When abnormality occurs, use remote control to retrieve error code.

OFF / ON

TIMER/CLOCK

FAN SPEED

MODE

CHECK

AIR SWING

OFF/ON

CANCEL

CLOCK

SET

SELECT

UP

DOWN

OFF

Indicator

1 , 3

2

Operation 

LED

Ensure the operation LED is in OFF condition.
1. Press for 5 seconds.
2. Press 

UP

 or 

DOWN

. If error code and abnormality can be 

identi ed, the operation LED  will be ON continuously, then jot 

down the error code.

3. Press for 5 seconds to quit checking.

4. Reveal the error code to authorized dealer.

OSTH0901-01

-  You can set the Timer for each day of the week (Monday to Sunday) with 6 programs per day.

-  ON Timer can be set together with your desired temperature and this temperature will be used 

continuously.

-  Same timer program cannot be set in the same day.

-  You may also select collective days with same timer setting.

-  Promotes energy saving by allowing you to set up to 6 programs in any given day.

MODE

UP

DOWN

SELECT

SELECT

OFF/ON

UP

DOWN

TEMP

SET

•  After 2 seconds, the display will move to the next program. Repeat steps 4 to 7 to set programs 2 to 6. 
•  During timer setup, if no button is pressed within 30 seconds, or if the 

SET

 button is pressed, the setting at 

that moment is con rmed and timer setup is ended.       

Perform the steps below to check the timer program for a particular day.
1. Press Timer 

MODE

 to enter timer mode.

2. Press 

SELECT

 to enter day setting.

3. Press Timer 

UP

 or 

DOWN

 until your desired day is shown, press 

SELECT

 to con rm your selection.

4. Press Timer 

UP

 or 

DOWN

 to check the set programs.

1. Press Timer 

MODE

 to enter timer mode.

2. Press 

SELECT

 to enter day setting.

3. Press Timer 

UP

 or 

DOWN

 until your desired day is shown.

4. Perform steps 4 to 7 of “Day and Timer Set Up Method” to modify existing timer program, or add any timer 

program.

-  You can set ON timer only or OFF timer only or both ON and OFF timer in a day.

Press Timer 

MODE

 to change the display to daily timer.

OFF/ON

Example: To turn ON the unit at 09:00
Press Timer 

OFF/ON

 to select ON timer.

Press 

UP

 or 

DOWN

 to select the desired time, then press 

SET

 to con rm the selected time.

Or press 

CANCEL

 if you do not want any setting for ON Timer.

Example: To turn OFF the unit at 18:30
Press Timer 

OFF/ON

 to select OFF timer.

Press 

UP

 or 

DOWN

 to select the desired time, then press 

SET

 to con rm the selected time.

Or press 

CANCEL

 if you do not want any setting for OFF Timer.

Note:

•  When ON timer is set, the unit may start early before the actual set time in order to achieve the 

desired temperature on time.

•  Timer operation is based on the clock set in the remote control and repeats daily once set. 

For clock setting, please refer to Remote Control preparation.

•  The timer closest to the current time will be activated  rst.

•  If timer is cancelled manually or due to power failure, you can restore the previous setting by 

pressing 

SET

.

Final Display of Daily Timer:

TIMER
ON

OFF

TIMER
ON

TIMER

OFF

Only ON Timer is selected.

The unit will automatically

switch ON at 9:00.

Only OFF Timer is selected.

The unit will automatically

switch OFF at 18:30.

Both ON and OFF Timer are

selected.

2 types of Timer mode can be selected on the remote control.

     -   Daily Timer

     -   Weekly Timer

-  Daily timer and weekly timer could not be set at the same time.

-  Select one of these Timers for your convenience.

TIMER/CLOCK

MODE

OFF/ON

CANCEL

CLOCK

SET

SELECT

UP

DOWN

Press

-  Press once to change the display from CLOCK to Timer or vice-versa.
-  Press for more than 4 seconds to change the display from Daily Timer to Weekly Timer or vice-versa.

Lights up if Timer operation is selected

Time to be selected

(10 minutes step)

OFF Timer

To automatically switch “OFF” the unit

ON Timer

To automatically 

switch “ON”

the unit 

ON Timer

To automatically switch “ON” the unit

OFF Timer

To automatically switch “OFF” the unit

Time to be selected

(10 minutes step)

Indicates the selected day

6 different programs can be set

in a day (1 ~ 6)

Lights up if Timer operation is selected

Day to be selected

Indicates the next timer operation day

F566767-OSTH0901-01_1EN.indd   2

1/13/2009   11:06:43 AM

Vrijeme uključivanja mjerača (ON) 

Automatsko uključivanje uređaja

Odabir dana

 - Moguće je postaviti mjerač vremena za svaki dan u tjednu (od ponedjeljka do nedjelje) sa 6 programa po danu.

 - Vrijeme uključivanja mjerača (ON) može se postaviti zajedno sa željenom temperaturom i ta će se 

temperatura neprestano upotrebljavati.

 - Isti program mjerača vremena nije moguće postaviti za isti dan.

 - Možete i odabrati veći broj dana s istom postavkom mjerača vremena.

 - Omogućuje uštedu energije tako što omogućuje postavljanje do 6 programa u svakom danu.

7.   Pritisnite       da biste potvrdili program 1. Odabrani dan bit će označen s ▼.

•  Nakon što prođu dvije sekunde, prikaz će prijeći na sljedeći program. Ponovite korake 4. do 7. da biste 

postavili programe 2 do 6.

•  Ako ne pritisnete niti jedan gumb 30 sekundi ili ako pritisnete gumb       tijekom postavljanja mjerača 

vremena, potvrđuje se postavka odabrana u tom trenutku i završava se postavljanje mjerača vremena.

Izvršite sljedeće korake da biste provjerili program mjerača vremena za određeni dan.
1.   Pritisnite mjerač vremena          da biste unijeli način rada mjerača vremena.
2.   Pritisnite         da biste unijeli postavku dana.
3.   Pritišćite mjerač vremena        ili         dok se ne prikaže željeni dan, a zatim pritisnite          da biste potvrdili odabir.
4.   Pritisnite mjerač vremena       ili         da biste provjerili postavljene programe.

1.   Pritisnite mjerač vremena          da biste unijeli način rada mjerača vremena.
2.   Pritisnite         da biste unijeli postavku dana.
3.   Pritišćite mjerač vremena       ili         dok se ne prikaže željeni dan.
4.   Izvršite korake 4. do 7. iz dijela "Metoda postavljanja dana i mjerača vremena" da biste promijenili postojeći 

program mjerača vremena ili dodali program mjerača vremena.

Izvršite sljedeće korake da biste poništili program mjerača za određeni dan.

1.  Pritisnite         da biste unijeli dan.
2.  Pritišćite mjerač vremena       ili         dok se ne prikaže željeni dan.
3.  Pritisnite         da biste unijeli programsku postavku.
4.  Pritišćite mjerač vremena       ili         dok se ne prikaže željeni dan.

Pritisnite          da biste poništili program, ▼ će nestati.

A - od ponedjeljka do petka: Uključivanje uređaja u 9:00 sati na 20 °C (program 1) i isključivanje uređaja u 

18:30 sati (program 2).

B - samo srijeda: Dodajte mjerač vremena za isključivanje uređaja u 12:30 (program 3) i za uključivanje uređaja 

u 13:30 (program 4).

 

■ Da biste postavili A (od ponedjeljka do petka – kolektivna postavka dana)

Da biste postavili vrijeme, proučite korake od 1. do 7. iz dijela "Metoda postavljanja dana i mjerača vremena" na 7. stranici. 

Program 1 – odaberite ON (Uklj.), postavite željeno vrijeme na 9:00 i željenu temperaturu na 20 °C. 

Program 2 – odaberite OFF (Isklj.) i postavite željeno vrijeme na 18:30.
Program 3 ~ 6 – nije postavljen program mjerača vremena, pritisnite          ili pričekajte 30 sekundi za 

izlazak iz tjednog mjerača vremena.

 

■  Da biste postavili B (srijeda – dodajte novi program mjerača)

1.   Pritisnite mjerač vremena          da biste unijeli način rada mjerača vremena.
2.   Pritisnite mjerač vremena          da biste unijeli postavku dana.
3.   Pritišćite mjerač vremena        ili         dok ne odaberete "WED" (Sri), pritisnite          da biste potvrdili svoj odabir.
4.   Izvedite korake od 4. do 7. iz dijela "Metoda postavljanja dana i mjerača vremena" da biste dodali programe 3 i 4.

Napomena: Prvi će se aktivirati mjerač vremena čije su postavke najbliže trenutačnom vremenu i danu.

•  Da biste isključili postavku tjednog mjerača vremena, pritisnite         , zatim pritisnite         .
•   Da biste uključili prethodnu postavku tjednog mjerača vremena, pritisnite         , zatim pritisnite      .

•   Uređaj se zaustavlja i LED-svjetlo koje označava rad uređaja isključeno je.

•   Pokazatelj OFF (Isklj.) ne prikazuje se na zaslonu daljinskog upravljača.

Kada dođe do nepravilnosti, preuzmite kod pogreške s pomoću daljinskog upravljača.

Provjerite je li LED-svjetlo koje označava rad uređaja isključeno.

1.  Pritisnite i držite 5 sekundi.
2.  Pritisnite       ili        . Ako se kod pogreške i nepravilnost mogu 

utvrditi, LED-svjetlo koje označava rad uređaja neprestano će 

svijetliti te tada zapišite kod pogreške.

3.  Pritisnite i držite 5 sekundi da biste prekinuli provjeru.

4.  Pokažite kod pogreške ovlaštenom dobavljaču.

OSTH0901-01

Na daljinskom se upravljaču mogu odabrati 2 načina rada mjerača vremena.

 - Dnevni mjerač vremena

 - Tjedni mjerač vremena

 - Dnevni mjerač vremena i tjedni mjerač vremena ne mogu se postaviti istovremeno.

 - Odaberite jedan od tih mjerača, ovisno o vašim potrebama.

Pritisnite

 - Pritisnite jednom da biste promijenili prikaz iz CLOCK (Sat) u mjerač vremena i obrnuto.

 - Držite pritisnutim duže od 4 sekunde da biste promijenili prikaz iz dnevnog mjerača vremena u tjedni i obrnuto.

Zasvijetli kada odaberete funkciju Timer (Mjerač vremena)

Vrijeme koje je 

potrebno odabrati

(pomak od 10 minuta)

Vrijeme isključivanja mjerača (OFF)

Automatsko isključivanje uređaja

 - Tijekom jednog dana možete postaviti samo vrijeme uključivanja mjerača (ON), samo vrijeme 

isključivanja mjerača (OFF) ili oboje.

Da biste prikaz promijenili na dnevni mjerač vremena, pritisnite mjerač vremena          .

Primjer: Za uključivanje uređaja (ON) u 9:00 sati
Pritisnite mjerač vremena          da biste odabrali vrijeme uključivanja mjerača (ON).
Pritisnite       ili         da biste odabrali željeno vrijeme, a zatim pritisnite       da biste potvrdili odabrano 

vrijeme.
Ili pritisnite         ako ne želite izvršiti nikakva postavljanja za vrijeme uključivanja mjerača (ON).
Primjer: Za isključivanje uređaja (OFF) u 18:30 sati
Pritisnite mjerač vremena          da biste odabrali vrijeme isključivanja mjerača (OFF).
Pritisnite        ili        da biste odabrali željeno vrijeme, a zatim pritisnite       da biste potvrdili odabrano 

vrijeme.
Ili pritisnite         ako ne želite izvršiti nikakva postavljanja za vrijeme isključivanja mjerača (OFF).
Napomena:

•  Kada je postavljeno vrijeme uključivanja mjerača (ON), uređaj bi se mogao uključiti prije stvarno 

postavljenog vremena kako bi postigao željenu temperaturu na vrijeme.

•  Rad mjerača vremena temelji se na postavkama sata u daljinskom upravljaču i nakon što je postavljen 

svakodnevno se ponavlja. Detalje o postavljanju sata potražite u dijelu Priprema daljinskog upravljača.

•  Najprije će se aktivirati mjerač vremena najbliži trenutačnom vremenu.

•  Ako ručno poništite mjerač vremena ili se to dogodi zbog nestanka struje, možete vratiti prethodne 

postavke pritiskom na      .

Konačni prikaz dnevnog mjerača vremena:

Odabrano je samo vrijeme 

uključivanja mjerača (ON). 

Uređaj se automatski 

uključuje u 9:00 sati.

Odabrano je samo vrijeme 

isključivanja mjerača (OFF). 

Uređaj se automatski 

isključuje u 18:30.

Odabrano je i vrijeme 

uključivanja (ON) i vrijeme 

isključivanja mjerača (OFF).

Vrijeme uključivanja 

mjerača (ON)

Automatsko 

uključivanje uređaja 

Zasvijetli kada odaberete funkciju Timer (Mjerač vremena)

Perform the steps below to cancel the timer program for a particular day.

TIMER/CLOCK

MODE

OFF/ON

CANCEL

CLOCK

SET

SELECT

UP

DOWN

4

2

1 , 3

1. Press 

SELECT

 to enter day.

2. Press Timer 

UP

 or 

DOWN

 until your desired day is shown.

3. Press 

SELECT

 to enter program setting.

4. Press Timer 

UP

 or 

DOWN

 until your desired day is shown.

Press 

CANCEL

 to cancel the program, 

 will disappear.

A - Monday to Friday: Unit ON at 09:00 with 20°C (program 1) & unit OFF at 18:30 (program 2).

B - Only Wednesday: Add timer to turn OFF the unit at 12:30 (program 3) and turn ON the unit at 13:30 

(program 4).

■ To set A (Monday to Friday – Collective day setting)

To set the time, please refer to steps 1 to 7 of “Day and Timer Set Up Method” on page 7.

Program 1 – select ON, set desired time to 9:00 and desired temperature to 20°C.

Program 2 – select OFF and set desired time to 18:30.
Program 3 ~ 6 – no timer program set, press 

MODE

 or wait 30 seconds to exit weekly timer.

■ To set B (Wednesday – add new timer program)

1. Press Timer 

MODE

 to enter timer mode.

2. Press Timer 

SELECT

 to enter day setting.  

3. Press Timer 

UP

 or 

DOWN

 until “WED” is selected, press 

SELECT

 to con rm your selection.

4. Perform steps 4 to 7 of “Day and Timer Set Up Method” to add program 3 and program 4.

Note: Timer that has setting nearest to the current time and day will be activated first.

•  To disable weekly timer setting, press 

MODE

, then press 

CANCEL

.

•  To enable previous weekly timer setting, press 

MODE

, then press 

SET

.

•  The unit stops and operation LED OFF.

•  OFF indicator does not shown on remote control display.

When abnormality occurs, use remote control to retrieve error code.

OFF / ON

TIMER/CLOCK

FAN SPEED

MODE

CHECK

AIR SWING

OFF/ON

CANCEL

CLOCK

SET

SELECT

UP

DOWN

OFF

Indicator

1 , 3

2

Operation 

LED

Ensure the operation LED is in OFF condition.
1. Press for 5 seconds.
2. Press 

UP

 or 

DOWN

. If error code and abnormality can be 

identi ed, the operation LED  will be ON continuously, then jot 

down the error code.

3. Press for 5 seconds to quit checking.

4. Reveal the error code to authorized dealer.

OSTH0901-01

-  You can set the Timer for each day of the week (Monday to Sunday) with 6 programs per day.

-  ON Timer can be set together with your desired temperature and this temperature will be used 

continuously.

-  Same timer program cannot be set in the same day.

-  You may also select collective days with same timer setting.

-  Promotes energy saving by allowing you to set up to 6 programs in any given day.

MODE

UP

DOWN

SELECT

SELECT

OFF/ON

UP

DOWN

TEMP

SET

•  After 2 seconds, the display will move to the next program. Repeat steps 4 to 7 to set programs 2 to 6. 
•  During timer setup, if no button is pressed within 30 seconds, or if the 

SET

 button is pressed, the setting at 

that moment is con rmed and timer setup is ended.       

Perform the steps below to check the timer program for a particular day.
1. Press Timer 

MODE

 to enter timer mode.

2. Press 

SELECT

 to enter day setting.

3. Press Timer 

UP

 or 

DOWN

 until your desired day is shown, press 

SELECT

 to con rm your selection.

4. Press Timer 

UP

 or 

DOWN

 to check the set programs.

1. Press Timer 

MODE

 to enter timer mode.

2. Press 

SELECT

 to enter day setting.

3. Press Timer 

UP

 or 

DOWN

 until your desired day is shown.

4. Perform steps 4 to 7 of “Day and Timer Set Up Method” to modify existing timer program, or add any timer 

program.

-  You can set ON timer only or OFF timer only or both ON and OFF timer in a day.

Press Timer 

MODE

 to change the display to daily timer.

OFF/ON

Example: To turn ON the unit at 09:00
Press Timer 

OFF/ON

 to select ON timer.

Press 

UP

 or 

DOWN

 to select the desired time, then press 

SET

 to con rm the selected time.

Or press 

CANCEL

 if you do not want any setting for ON Timer.

Example: To turn OFF the unit at 18:30
Press Timer 

OFF/ON

 to select OFF timer.

Press 

UP

 or 

DOWN

 to select the desired time, then press 

SET

 to con rm the selected time.

Or press 

CANCEL

 if you do not want any setting for OFF Timer.

Note:

•  When ON timer is set, the unit may start early before the actual set time in order to achieve the 

desired temperature on time.

•  Timer operation is based on the clock set in the remote control and repeats daily once set. 

For clock setting, please refer to Remote Control preparation.

•  The timer closest to the current time will be activated  rst.

•  If timer is cancelled manually or due to power failure, you can restore the previous setting by 

pressing 

SET

.

Final Display of Daily Timer:

TIMER
ON

OFF

TIMER
ON

TIMER

OFF

Only ON Timer is selected.

The unit will automatically

switch ON at 9:00.

Only OFF Timer is selected.

The unit will automatically

switch OFF at 18:30.

Both ON and OFF Timer are

selected.

2 types of Timer mode can be selected on the remote control.

     -   Daily Timer

     -   Weekly Timer

-  Daily timer and weekly timer could not be set at the same time.

-  Select one of these Timers for your convenience.

TIMER/CLOCK

MODE

OFF/ON

CANCEL

CLOCK

SET

SELECT

UP

DOWN

Press

-  Press once to change the display from CLOCK to Timer or vice-versa.
-  Press for more than 4 seconds to change the display from Daily Timer to Weekly Timer or vice-versa.

Lights up if Timer operation is selected

Time to be selected

(10 minutes step)

OFF Timer

To automatically switch “OFF” the unit

ON Timer

To automatically 

switch “ON”

the unit 

ON Timer

To automatically switch “ON” the unit

OFF Timer

To automatically switch “OFF” the unit

Time to be selected

(10 minutes step)

Indicates the selected day

6 different programs can be set

in a day (1 ~ 6)

Lights up if Timer operation is selected

Day to be selected

Indicates the next timer operation day

F566767-OSTH0901-01_1EN.indd   2

1/13/2009   11:06:43 AM

Perform the steps below to cancel the timer program for a particular day.

TIMER/CLOCK

MODE

OFF/ON

CANCEL

CLOCK

SET

SELECT

UP

DOWN

4

2

1 , 3

1. Press 

SELECT

 to enter day.

2. Press Timer 

UP

 or 

DOWN

 until your desired day is shown.

3. Press 

SELECT

 to enter program setting.

4. Press Timer 

UP

 or 

DOWN

 until your desired day is shown.

Press 

CANCEL

 to cancel the program, 

 will disappear.

A - Monday to Friday: Unit ON at 09:00 with 20°C (program 1) & unit OFF at 18:30 (program 2).

B - Only Wednesday: Add timer to turn OFF the unit at 12:30 (program 3) and turn ON the unit at 13:30 

(program 4).

■ To set A (Monday to Friday – Collective day setting)

To set the time, please refer to steps 1 to 7 of “Day and Timer Set Up Method” on page 7.

Program 1 – select ON, set desired time to 9:00 and desired temperature to 20°C.

Program 2 – select OFF and set desired time to 18:30.
Program 3 ~ 6 – no timer program set, press 

MODE

 or wait 30 seconds to exit weekly timer.

■ To set B (Wednesday – add new timer program)

1. Press Timer 

MODE

 to enter timer mode.

2. Press Timer 

SELECT

 to enter day setting.  

3. Press Timer 

UP

 or 

DOWN

 until “WED” is selected, press 

SELECT

 to con rm your selection.

4. Perform steps 4 to 7 of “Day and Timer Set Up Method” to add program 3 and program 4.

Note: Timer that has setting nearest to the current time and day will be activated first.

•  To disable weekly timer setting, press 

MODE

, then press 

CANCEL

.

•  To enable previous weekly timer setting, press 

MODE

, then press 

SET

.

•  The unit stops and operation LED OFF.

•  OFF indicator does not shown on remote control display.

When abnormality occurs, use remote control to retrieve error code.

OFF / ON

TIMER/CLOCK

FAN SPEED

MODE

CHECK

AIR SWING

OFF/ON

CANCEL

CLOCK

SET

SELECT

UP

DOWN

OFF

Indicator

1 , 3

2

Operation 

LED

Ensure the operation LED is in OFF condition.
1. Press for 5 seconds.
2. Press 

UP

 or 

DOWN

. If error code and abnormality can be 

identi ed, the operation LED  will be ON continuously, then jot 

down the error code.

3. Press for 5 seconds to quit checking.

4. Reveal the error code to authorized dealer.

OSTH0901-01

-  You can set the Timer for each day of the week (Monday to Sunday) with 6 programs per day.

-  ON Timer can be set together with your desired temperature and this temperature will be used 

continuously.

-  Same timer program cannot be set in the same day.

-  You may also select collective days with same timer setting.

-  Promotes energy saving by allowing you to set up to 6 programs in any given day.

MODE

UP

DOWN

SELECT

SELECT

OFF/ON

UP

DOWN

TEMP

SET

•  After 2 seconds, the display will move to the next program. Repeat steps 4 to 7 to set programs 2 to 6. 
•  During timer setup, if no button is pressed within 30 seconds, or if the 

SET

 button is pressed, the setting at 

that moment is con rmed and timer setup is ended.       

Perform the steps below to check the timer program for a particular day.
1. Press Timer 

MODE

 to enter timer mode.

2. Press 

SELECT

 to enter day setting.

3. Press Timer 

UP

 or 

DOWN

 until your desired day is shown, press 

SELECT

 to con rm your selection.

4. Press Timer 

UP

 or 

DOWN

 to check the set programs.

1. Press Timer 

MODE

 to enter timer mode.

2. Press 

SELECT

 to enter day setting.

3. Press Timer 

UP

 or 

DOWN

 until your desired day is shown.

4. Perform steps 4 to 7 of “Day and Timer Set Up Method” to modify existing timer program, or add any timer 

program.

-  You can set ON timer only or OFF timer only or both ON and OFF timer in a day.

Press Timer 

MODE

 to change the display to daily timer.

OFF/ON

Example: To turn ON the unit at 09:00
Press Timer 

OFF/ON

 to select ON timer.

Press 

UP

 or 

DOWN

 to select the desired time, then press 

SET

 to con rm the selected time.

Or press 

CANCEL

 if you do not want any setting for ON Timer.

Example: To turn OFF the unit at 18:30
Press Timer 

OFF/ON

 to select OFF timer.

Press 

UP

 or 

DOWN

 to select the desired time, then press 

SET

 to con rm the selected time.

Or press 

CANCEL

 if you do not want any setting for OFF Timer.

Note:

•  When ON timer is set, the unit may start early before the actual set time in order to achieve the 

desired temperature on time.

•  Timer operation is based on the clock set in the remote control and repeats daily once set. 

For clock setting, please refer to Remote Control preparation.

•  The timer closest to the current time will be activated  rst.

•  If timer is cancelled manually or due to power failure, you can restore the previous setting by 

pressing 

SET

.

Final Display of Daily Timer:

TIMER
ON

OFF

TIMER
ON

TIMER

OFF

Only ON Timer is selected.

The unit will automatically

switch ON at 9:00.

Only OFF Timer is selected.

The unit will automatically

switch OFF at 18:30.

Both ON and OFF Timer are

selected.

2 types of Timer mode can be selected on the remote control.

     -   Daily Timer

     -   Weekly Timer

-  Daily timer and weekly timer could not be set at the same time.

-  Select one of these Timers for your convenience.

TIMER/CLOCK

MODE

OFF/ON

CANCEL

CLOCK

SET

SELECT

UP

DOWN

Press

-  Press once to change the display from CLOCK to Timer or vice-versa.
-  Press for more than 4 seconds to change the display from Daily Timer to Weekly Timer or vice-versa.

Lights up if Timer operation is selected

Time to be selected

(10 minutes step)

OFF Timer

To automatically switch “OFF” the unit

ON Timer

To automatically 

switch “ON”

the unit 

ON Timer

To automatically switch “ON” the unit

OFF Timer

To automatically switch “OFF” the unit

Time to be selected

(10 minutes step)

Indicates the selected day

6 different programs can be set

in a day (1 ~ 6)

Lights up if Timer operation is selected

Day to be selected

Indicates the next timer operation day

F566767-OSTH0901-01_1EN.indd   2

1/13/2009   11:06:43 AM

Perform the steps below to cancel the timer program for a particular day.

TIMER/CLOCK

MODE

OFF/ON

CANCEL

CLOCK

SET

SELECT

UP

DOWN

4

2

1 , 3

1. Press 

SELECT

 to enter day.

2. Press Timer 

UP

 or 

DOWN

 until your desired day is shown.

3. Press 

SELECT

 to enter program setting.

4. Press Timer 

UP

 or 

DOWN

 until your desired day is shown.

Press 

CANCEL

 to cancel the program, 

 will disappear.

A - Monday to Friday: Unit ON at 09:00 with 20°C (program 1) & unit OFF at 18:30 (program 2).

B - Only Wednesday: Add timer to turn OFF the unit at 12:30 (program 3) and turn ON the unit at 13:30 

(program 4).

■ To set A (Monday to Friday – Collective day setting)

To set the time, please refer to steps 1 to 7 of “Day and Timer Set Up Method” on page 7.

Program 1 – select ON, set desired time to 9:00 and desired temperature to 20°C.

Program 2 – select OFF and set desired time to 18:30.
Program 3 ~ 6 – no timer program set, press 

MODE

 or wait 30 seconds to exit weekly timer.

■ To set B (Wednesday – add new timer program)

1. Press Timer 

MODE

 to enter timer mode.

2. Press Timer 

SELECT

 to enter day setting.  

3. Press Timer 

UP

 or 

DOWN

 until “WED” is selected, press 

SELECT

 to con rm your selection.

4. Perform steps 4 to 7 of “Day and Timer Set Up Method” to add program 3 and program 4.

Note: Timer that has setting nearest to the current time and day will be activated first.

•  To disable weekly timer setting, press 

MODE

, then press 

CANCEL

.

•  To enable previous weekly timer setting, press 

MODE

, then press 

SET

.

•  The unit stops and operation LED OFF.

•  OFF indicator does not shown on remote control display.

When abnormality occurs, use remote control to retrieve error code.

OFF / ON

TIMER/CLOCK

FAN SPEED

MODE

CHECK

AIR SWING

OFF/ON

CANCEL

CLOCK

SET

SELECT

UP

DOWN

OFF

Indicator

1 , 3

2

Operation 

LED

Ensure the operation LED is in OFF condition.
1. Press for 5 seconds.
2. Press 

UP

 or 

DOWN

. If error code and abnormality can be 

identi ed, the operation LED  will be ON continuously, then jot 

down the error code.

3. Press for 5 seconds to quit checking.

4. Reveal the error code to authorized dealer.

OSTH0901-01

-  You can set the Timer for each day of the week (Monday to Sunday) with 6 programs per day.

-  ON Timer can be set together with your desired temperature and this temperature will be used 

continuously.

-  Same timer program cannot be set in the same day.

-  You may also select collective days with same timer setting.

-  Promotes energy saving by allowing you to set up to 6 programs in any given day.

MODE

UP

DOWN

SELECT

SELECT

OFF/ON

UP

DOWN

TEMP

SET

•  After 2 seconds, the display will move to the next program. Repeat steps 4 to 7 to set programs 2 to 6. 
•  During timer setup, if no button is pressed within 30 seconds, or if the 

SET

 button is pressed, the setting at 

that moment is con rmed and timer setup is ended.       

Perform the steps below to check the timer program for a particular day.
1. Press Timer 

MODE

 to enter timer mode.

2. Press 

SELECT

 to enter day setting.

3. Press Timer 

UP

 or 

DOWN

 until your desired day is shown, press 

SELECT

 to con rm your selection.

4. Press Timer 

UP

 or 

DOWN

 to check the set programs.

1. Press Timer 

MODE

 to enter timer mode.

2. Press 

SELECT

 to enter day setting.

3. Press Timer 

UP

 or 

DOWN

 until your desired day is shown.

4. Perform steps 4 to 7 of “Day and Timer Set Up Method” to modify existing timer program, or add any timer 

program.

-  You can set ON timer only or OFF timer only or both ON and OFF timer in a day.

Press Timer 

MODE

 to change the display to daily timer.

OFF/ON

Example: To turn ON the unit at 09:00
Press Timer 

OFF/ON

 to select ON timer.

Press 

UP

 or 

DOWN

 to select the desired time, then press 

SET

 to con rm the selected time.

Or press 

CANCEL

 if you do not want any setting for ON Timer.

Example: To turn OFF the unit at 18:30
Press Timer 

OFF/ON

 to select OFF timer.

Press 

UP

 or 

DOWN

 to select the desired time, then press 

SET

 to con rm the selected time.

Or press 

CANCEL

 if you do not want any setting for OFF Timer.

Note:

•  When ON timer is set, the unit may start early before the actual set time in order to achieve the 

desired temperature on time.

•  Timer operation is based on the clock set in the remote control and repeats daily once set. 

For clock setting, please refer to Remote Control preparation.

•  The timer closest to the current time will be activated  rst.

•  If timer is cancelled manually or due to power failure, you can restore the previous setting by 

pressing 

SET

.

Final Display of Daily Timer:

TIMER
ON

OFF

TIMER
ON

TIMER

OFF

Only ON Timer is selected.

The unit will automatically

switch ON at 9:00.

Only OFF Timer is selected.

The unit will automatically

switch OFF at 18:30.

Both ON and OFF Timer are

selected.

2 types of Timer mode can be selected on the remote control.

     -   Daily Timer

     -   Weekly Timer

-  Daily timer and weekly timer could not be set at the same time.

-  Select one of these Timers for your convenience.

TIMER/CLOCK

MODE

OFF/ON

CANCEL

CLOCK

SET

SELECT

UP

DOWN

Press

-  Press once to change the display from CLOCK to Timer or vice-versa.
-  Press for more than 4 seconds to change the display from Daily Timer to Weekly Timer or vice-versa.

Lights up if Timer operation is selected

Time to be selected

(10 minutes step)

OFF Timer

To automatically switch “OFF” the unit

ON Timer

To automatically 

switch “ON”

the unit 

ON Timer

To automatically switch “ON” the unit

OFF Timer

To automatically switch “OFF” the unit

Time to be selected

(10 minutes step)

Indicates the selected day

6 different programs can be set

in a day (1 ~ 6)

Lights up if Timer operation is selected

Day to be selected

Indicates the next timer operation day

F566767-OSTH0901-01_1EN.indd   2

1/13/2009   11:06:43 AM

Za jedan je dan moguće postaviti  

6 različitih programa (1 ~ 6)
Pokazuje odabrani dan

Pokazuje sljedeći dan rada mjerača vremena
Vrijeme koje je potrebno odabrati  

(pomak od 10 minuta)
Vrijeme isključivanja mjerača (OFF)

Automatsko isključivanje uređaja

Pokazatelj OFF 

(Isključeno)
LED-svjetlo 

koje označava 

rad uređaja