Panasonic ESLV9N Operating Guide
12
• Keep both the inner blades inserted. If only one of the inner
blades is inserted, the shaver may be damaged.
• If you clean the shaver with water, do not use salt water or
hot water. Do not soak the shaver in water for a long period
of time.
of time.
Parts identification
A
Main body
1
Protective cap
2
System outer foil
3
Foil frame
4
Smooth rollers
• They help to glide over
the skin more easily.
5
Foil frame release buttons
6
Power switch
7
Lamp display
a. Used time lamp
b. Battery capacity lamp
c. Shaving sensor lamp
b. Battery capacity lamp
c. Shaving sensor lamp
( )
d. Clean lamp ( )
e. Switch lock lamp ( )
f. Foil/blade check lamp
e. Switch lock lamp ( )
f. Foil/blade check lamp
( )
g. Charge status lamp
( )
8
Appliance socket
9
Outer foil section
:
System outer foil release
buttons
;
Inner blades
<
Trimmer
=
Trimmer handle
>
Main body rear terminals
B
Self-cleaning recharger
?
Charging terminals
@
Cleaning liquid unit
removal button
A
Intake port
B
Self‑cleaning recharger
socket
C
Lock release lever
D
Cleaning liquid filter
Cleaning liquid unit
STATUS lamp
LOW lamp
CLEAN lamp
DRY lamp
SELECT button
C
AC adaptor (RE7-87)
Adaptor
Power plug
Cord
Appliance plug
Accessories
D
D
Travel case
E
Cleaning brush
F
Oil
G
Special detergent
(Detergent)
H
Operating Instructions
I
Guarantee Card
There may be water droplets
inside the self‑cleaning
recharger at the time of
purchase, but there is no
problem regarding the hygiene
or the performance. (It is a
residue of the distilled water
used for performance test.)
inside the self‑cleaning
recharger at the time of
purchase, but there is no
problem regarding the hygiene
or the performance. (It is a
residue of the distilled water
used for performance test.)
Preparation
Charging the shaver
• Turn the shaver off.
• Wipe off any water droplets on the main body rear terminals.
1
Insert the appliance plug
[C] into the self-cleaning
recharger [B].
[C] into the self-cleaning
recharger [B].
2
Remove the protective cap
[A1] while pressing the side
of the cap and insert the
shaver into the self-cleaning
recharger.
[A1] while pressing the side
of the cap and insert the
shaver into the self-cleaning
recharger.
• Slowly insert the shaver into the
self‑cleaning recharger taking care
not to damage the system outer
foil.
not to damage the system outer
foil.
1
2
3
3
Plug the adaptor [C] into a household outlet.
• Check that the charge status lamp ( ) is glowing.
• Charging is completed after approx. 1 hour.
ES-LV9N_EU.indb 12
2015/12/11 13:05:49