Panasonic KYB925GLEPG Operating Guide

EN-

52

Installing the appliance as flush-fitting

 

Only suitable for installation on heat and water resistant worktops such as 

marble, natural stone, solid wood (if cut out edges are sealed).

 

Mount onto other types of worktops only with the recommendation of the 

worktop manufacturer.

 

Remove the cushion from the underside of the appliance before flush fitting.

 

The internal width of the base unit must be at least as wide as the internal  

cut-out width for the hob. This is to ensure that the casing can be easily 

removed for maintenance.

 

 Before sealing in, test that the appliance works. Grout the perimeter using a 

heat resistant silicone. Smooth the seal with a suitable finishing product.  

Follow the silicone instructions and do not turn on the appliance until the 

silicone is completely dry.

 

Please observe the diagrams for the cut-out dimensions in granite 

and marble worktops. 

 

Using unsuitable silicone may cause permanent colour changes 

to marble worktops.

Uninstalling the appliance as flush-fitting

 

Disconnect the appliance from the mains.

 

 Remove the silicone seal from the perimeter with a suitable tool.

 

 Push the appliance upwards from below to remove it.

Do not try to remove the appliance by prying it out from above.

490

870

904

17

5.5

R3

R3

29

524

(measurement: mm)