Panasonic MCCG475K Operating Guide

4

A) Floor nozzle
B) Connection pipe
C) Hose
D) Suction regulator

E) Curved wand

F) Telescopic wand

G) Hose inlet

H) Dust indicator

I ) Dust cover
J) ON/OFF Switch pedal 

K) Cord rewind pedal

L) Crevice nozzle

M) Dusting brush

N) Exhaust cover

O) Plug

P) Variable power control button

B-1   Insert connection pipe into hose inlet until it locks. 

 

 When removing hose assembly, pull out connection 

pipe with pushing down two connection buttons.

 

NOTE:  Do not bend, pull and step on the hose or put 

anything heavy on it.

B-2   Insert the hose unit into the upper end of the 

connected telescopic wand, and the floor nozzle to 

the other end.

B-3   You can adjust the length of telescopic wand by 

pushing button.

C-1   Pull out the mains lead and put the plug into the 

C-2   Gently press at the center of the switch pedal to 

 

Press the pedal again to turn it OFF.

C-3  Power control 

 

 To increase or decrease the power, turn the variable 

power control button.

C-4  Switching between carpet and flooring

 

Flooring: Press lever A

 

Carpet: Press lever B

C-5   The curved wand of the hose is attached with a 

manual suction regulator, which allows you to briefly 

reduce the suction level.

C-6    After you finish vacuuming, remove the plug from 

 

  When rewinding the mains lead, press the cord 

rewind pedal by holding the plug so that it does not 

become damaged.

C-7  Storage position

 

 Slide the wand holder attached to floor nozzle pipe 

straight into the wand supporter on the under side of 

the main body.

C-8  Park position

 

 For short breaks during vacuuming, slide the wand 

holder attached to the floor nozzle pipe into the wand 

supporter on the rear side of main body. 

 

NOTE:  When you use park position, we suggest the 

appliance is switched off.