Panasonic KHB90FBW1 Operating Guide
16
Key 4: 3rd Speed
If the LED is off and another speed is active, press the key (slightly or prolonged) to select
the 3rd speed, turn the relative LED on and turn the LED associated to the previously selected
speed off.
If the LED is off and no speed is active, the key is disabled.
When the LED is on, key 4 is disabled.
To turn off the cooker hood, select the fi rst speed and press that key again.
the 3rd speed, turn the relative LED on and turn the LED associated to the previously selected
speed off.
If the LED is off and no speed is active, the key is disabled.
When the LED is on, key 4 is disabled.
To turn off the cooker hood, select the fi rst speed and press that key again.
Key 5: 4th Speed
If the LED is off and another speed is active, press the key (slightly or prolonged) to select
the 4th speed, turn the relative LED on and turn the LED associated to the previously selected
speed off.
If the LED is off and no speed is active, the key is disabled.
When the LED is on, key 5 is disabled.
The fourth speed lasts 14 minutes, then the cooker hood returns to the third speed.
To turn off the cooker hood, select the fi rst speed and press that key again.
the 4th speed, turn the relative LED on and turn the LED associated to the previously selected
speed off.
If the LED is off and no speed is active, the key is disabled.
When the LED is on, key 5 is disabled.
The fourth speed lasts 14 minutes, then the cooker hood returns to the third speed.
To turn off the cooker hood, select the fi rst speed and press that key again.
Key 6: Light
Light: Briefl y pressing key T6 will turn the light on and off. The T6 key lights on if the light is on.
Key pressure management
Prolonged pressure = fi nger pressed on key for at least 3 seconds, the function activates dur-
ing pressure.
Non-prolonged pressure = fi nger pressed on key for less than 3 seconds, the function activates
upon its release.
ing pressure.
Non-prolonged pressure = fi nger pressed on key for less than 3 seconds, the function activates
upon its release.
FILTERS
REMOVING AND REPLACING’S INSTRUCTIONS
H
1. METAL FILTERS
Open the panel (see fi g. H1). To remove the grease-trapping metallic fi lters pull on the
handles. To place the grease-trapping metallic fi lters, insert the tabs into the holes as il-
lustrated in the lower left fi gure.
handles. To place the grease-trapping metallic fi lters, insert the tabs into the holes as il-
lustrated in the lower left fi gure.
2. CARBON FILTERS
To replace the charcoal filters, proceed as follows: remove the metal filters as described
above. Now the motor compartment can be accessed and it is possible to proceed with
the assembly/disassembly of the carbon filters as illustrated in the lower right figure.
above. Now the motor compartment can be accessed and it is possible to proceed with
the assembly/disassembly of the carbon filters as illustrated in the lower right figure.
To order new charcoal fi lters, contact your distributor/dealer.