Panasonic MCUL426 Operating Guide
- 31 -
Route nozzle hose to hose holder. Align
nozzle hose bracket with slot on vacuum
cleaner and slide down until it clicks into
place.
nozzle hose bracket with slot on vacuum
cleaner and slide down until it clicks into
place.
Return the vacuum cleaner to the upright
position before plugging into a mains
socket.
position before plugging into a mains
socket.
1
2
1
9
Replace belt whenever beater bar stops turning or a burning rubber smell
caused by excessive slippage occurs. Refer to VACUUM CLEANER
CONSUMABLES/ACCESSORIES (page 40) for part number.
caused by excessive slippage occurs. Refer to VACUUM CLEANER
CONSUMABLES/ACCESSORIES (page 40) for part number.
F) BELT REPLACEMENT (MC-UL426)
Turn off and unplug the vacuum cleaner.
Always place paper under nozzle
whenever lower plate is removed to
protect floor.
whenever lower plate is removed to
protect floor.
Place vacuum cleaner in upright position
and turn vacuum cleaner over to expose
lower plate.
and turn vacuum cleaner over to expose
lower plate.
1
1
1
2
Release lower plate by rotating the lower
plate latches to the UNLOCK position.
plate latches to the UNLOCK position.
Remove lower plate and remove any
residue that may exist in belt area.
residue that may exist in belt area.