Panasonic ESED94 Operating Guide

Page of 378
18
Using the shaver head
WET Shaving with soap lather makes the skin slippery for a 
closer shave. For DRY shaving, step 3 is unnecessary. Before 
DRY shaving, wipe dry any moisture or sweat from the skin.
1
1
Attach the shaver head [H].
• Confirm the bikini comb [G] is detached.
2
2
Check that the outer foil is not deformed or 
damaged.
3
3
Wet your skin and put shower gel on your skin.
• Do not use shaving cream, skin cream or skin lotion as it 
will clog the blades.
4
4
Select the mode by pressing the power switch 
[M]. (  Page 15)
• Press gently so that the whole blade is in close contact 
with the skin and the surface of the blade does not move 
up and down.
Using the foot care head
• The foot care head cannot be used in a bath or shower.
• Before use, be sure to fully charge the appliance.
• We recommend using the product within 30 minutes after 
bathing or showering. With the feet clean, wipe off any water on 
the skin. (Each use should be approximately 10 minutes (5 
minutes on each foot, 10 minutes total for both feet))
1
1
Attach the foot care head [J].
• Push down firmly until you hear a “click”.
2
2
Press the power switch [M
once.
• NORMAL mode is recommended for 
rotation speed. (  Page 15)
1
2
3
3
Bring the foot care head into contact with the 
skin, and begin filing.
• Filing a single location for a long time can cause it to 
become hot with friction. To avoid this, be sure to make 
small changes in the filing position while filing.
• Filing should be performed about once every two weeks.
The basics of foot care
Do not use the product for filing anything other 
than calluses and hardened skin on the feet.
<Use on>
Callus
A callus is a hardened layer that forms through 
repeated pressure or abrasion.
a
 Hardened layer
b
 Epidermis
c
 Derma