Panasonic ESED94 Operating Guide

FIN

3. Wash the head with water to wash out hair.

• Do not use hot water.

• If soap is not completely washed away, then a

white deposit can accumulate and prevent the
discs and the blades from moving smoothly.

• Rinse the shaver head with the frame

removed.

4. Turn the switch off, wipe the appliance with a dry cloth

and dry it well.

Foot care head

1. Apply liquid hand soap to the central part of the file.

2. Pour a small amount of water on the file and turn the

switch on.

3. Rinse any debris thoroughly with water or lukewarm

water.

4. After turning the switch off, remove the frame and rinse

inside.

5. Wipe with a dry cloth and dry in a well-ventilated location.

Sonic scrub head

1. Pour a small quantity of water and liquid hand soap into

the centre of the scrub brush.

2. Turn the switch on and then foam is created.

3. Use water to thoroughly rinse away foam and liquid hand

soap.

• Thoroughly rinse the hole in the centre of the scrub brush.

4. Switch off, remove the sonic scrub head and thoroughly

rinse the underside of the sonic scrub head.

5. Wipe the appliance with a dry cloth and dry it well.

Replacing the outer foil

We recommend replacing the outer foil [H9]

every year and

the inner blade

every two years. Remove the outer foil of the

shaver head [H] only when replacing it.
1. While pushing the outer foil gently with the fingers, use a

fingernail to release the plastic panel (b) on the blade

from the hooks (a) on the inside of the frame.

2. The new outer foil should be slightly bent and pushed in

until it is hooked in the frame.



