Panasonic cw-sc90ya Operating Guide

6 Place cabinet into the installation hole
6

7 Slide the chassis back into the cabinet
7

3 Remove the front grille
3

5 Slide the chassis out from the cabinet
5

Remove the front grille.

Anticlockwise

Anticlockwise

a
b

c

d

e

4 Remove the chassis

4

Unscrew and remove both chassis locking brackets. Keep them for reinstallation.

a

c

d

Tilt up and pull out
the air filter by the
holder.

2 Remove the air filter
2

Air filter

Tilt down for
better drainage
(max. 10mm).

10

Secure it with wood screws or nails.

b

aRemove the adhesive tapes from all sides

of the front grille.

bOpen the control panel cover.

cAt bottom right side of front grille, press

inward on cabinet near the power cord, and
pull the grille outward to the right until right
tab releases.

dAt bottom left side, push inward on cabinet

and pull the grille outward to the left to
release the left tab.
Do not pull the bottom edge toward you
more than 3 inches as to prevent top two
tabs from damage.

eSlide the front grille upward to free the two

top tabs from slots at the top of the cabinet.

e

CLOSE     VENT    

 OPEN

CW-PC70/90YA(09-13)

1/30/01, 10:53 AM

10