Panasonic TH-47LFP30W Operating Guide
3
Power cable
To keep the waterproof property, do not loosen the part fi xing
the power cable to the rear plate.
the power cable to the rear plate.
Do not force to bend the protruding part of the power cable.
This may cause disconnection.
This may cause disconnection.
Protective coating
Cabinet aluminum parts and rear plate are protected from corrosion wth coating. Be careful not to damage
the surface. In case the surface is damaged, corrosion may occur from there.
the surface. In case the surface is damaged, corrosion may occur from there.
Installation position
Do not install the product to a place where the product is exposed to direct sunlight.
• If the screen is exposed to direct sunlight, the liquid crystal panel may have adverse effect.
• When direct sunlight is on the screen, black shadow may appear. This will disappear when the temperature
• When direct sunlight is on the screen, black shadow may appear. This will disappear when the temperature
drops.
• To avoid direct sunlight, installing a “canopy” above this product is recommended.
• To install the product long term in a special environment such as near a swimming pool, hot spring, or ocean, or in
• To install the product long term in a special environment such as near a swimming pool, hot spring, or ocean, or in
a factory uses chemicals or gases, please consult your local Panasonic dealer beforehand.
Installation conditions
To use the product in an environment where outdoor air temperature is lower than 39 °F (4 °C), make sure
to set the “Winter Mode” to “On”. The inside temperature is kept constant and the startup can be performed
smoothly.
to set the “Winter Mode” to “On”. The inside temperature is kept constant and the startup can be performed
smoothly.
Do not exhibit or use this product in a condition where water splashes on to it continuously for long time.
To install on a wall etc.
• Consult your dealer about fi ttings etc. beforehand.
• Choose a permanent position where the total weight of the product and fi ttings can be hold permanently. If the
• Choose a permanent position where the total weight of the product and fi ttings can be hold permanently. If the
strength of the position is not suffi cient, a serious accident such as fall may be caused.
• Do not install the product where a person can be hang or lean on, or a passer may collide into. Accident may be
caused.
• Take measures for tipping over and fall with an assumption of a fi tting or installation location failure.
• Installation strength may be degraded due to aging depends on the environment. Ask a installation professional to
• Installation strength may be degraded due to aging depends on the environment. Ask a installation professional to
inspect or repair regularly.
• When an abnormality or fault such as loose screw is detected, ask an installation professional or your dealer
immediately for repair.
• Panasonic will not be responsible for any damages from an accident such as defect of installation, improper use,
modifi cation, or natural disaster.
Precautions for Installation