Panasonic NRB54X1 Operating Guide

Installation

If the refrigerator will not pass through a doorway or entrance, its doors can be removed.

Before removing the doors, be absolutely sure to check that the power of the refrigerator has been 

turned off.

When you want to remove the doors, please contact your dealer, an authorized service centre or 

access to our Web site (http://panasonic.net).

Dimensions (mm): W900 × D610 × H1845 (Without Door)

Removing the front grille

When the two doors are opened and the front grille is viewed from 

above, two screws – one on the left and the other on the right – will 

be seen.

Turn these screws counterclockwise, and remove them.

There is a connecting area slightly to the right of the centre of the 

front grille on its bottom. Take hold of this area, and pull the grille 

toward you to remove it.

Front grille

Connecting area

Disconnecting the water supply hoses

Remove the connecting ring (black) of the water supply connector, 

pressing the coupler and pull the water supply hose free.

 

● There are two water supply hoses, one for the Ice dispenser and 

one for the Water dispenser.  

Disconnect both of them.

Connecting ring

Water supply 

connector

Coupler

First insert the connecting ring (black) into the water supply 

connector, and then insert the water supply hose.

Insert the water supply hose into the water supply connector until 

the printed line on the hose is no longer visible.

 

● Two water supply hoses connect the same colour.

Connecting ring

Line