Panasonic ESLV6N Operating Guide

13

 

• When charging the shaver for the first time or when it has not 

been in use for more than 6 months, the charging time may 
change or the charge status lamp ( ) may not glow for a few 
minutes. It will eventually glow if kept connected.

 

• Recommended ambient temperature for charging is 

10 – 35 °C. It may take longer to charge, or the charge status 
lamp ( ) will blink quickly and the battery may fail to charge 
properly in extremely high or low temperatures.

 

• The shaver can be used for approximately 2 weeks with a full 

charge.  
(Based on one 3‑minute dry‑shave use per day) 
The number of usable days varies depending on the 
following conditions.

- Beard thickness

- Pressure applied to the skin

- Ambient temperature

- Usage frequency of the sonic vibration cleaning mode

 

• If there is noise from radio or other source while using the 

shaver, move to a different location to use the shaver.

 

• The “shaving sensor”, which automatically 

adjusts the power depending on the beard 
thickness, will operate. 
It will shave with high power on areas 
where the beard is heavy, and reduce the 
power on areas where the beard is thin, to 
reduce burden on the skin.

 

• The power cannot be turned on when the switch lock lamp 

( ) blinks, as the power switch is locked. 
Press the power switch for more than 2 seconds to unlock.  
(See page 14.)

Tips for better shaving
Apply the whole system outer foil 
perpendicularly against the skin and 
shave by slowly gliding the shaver over 
the face against the grain of the beard.

 

• The beard under the chin and around 

the throat can be shaved better by 
stretching the skin so the beard will 
stand.

 

• To prevent damaging the system 

outer foil, do not shave with only a 
part of the system outer foil.