Panasonic ESLF71 Operating Guide
English
Clean the housing only with a soft cloth slightly dampened
with tap water or soapy tap water. Do not use thinner, benzine,
alcohol or other chemicals.
with tap water or soapy tap water. Do not use thinner, benzine,
alcohol or other chemicals.
Storing the shaver
Store the shaver in a place with low humidity after use.
Do not store the shaver where it will be exposed to direct
sunlight or other heat sources.
Disconnect the power cord when storing the shaver.
Do not bend the power cord or wrap it around the shaver.
Keep the oil away from children.
Do not store the shaver where it will be exposed to direct
sunlight or other heat sources.
Disconnect the power cord when storing the shaver.
Do not bend the power cord or wrap it around the shaver.
Keep the oil away from children.
Self‑cleaning recharger
Do not clean the AC adaptor or the self‑cleaning recharger in
water as it will damage them or cause an electric shock.
Do not remove the shaver from the self‑cleaning recharger
while using a course that includes the “Dry” function. A heater
is used so the area around the blades becomes extremely hot
and you may burn yourself.
Place the self‑cleaning recharger on a level and stable surface.
Otherwise the cleaning liquid may spill and discolor leather
products or other surfaces. Wipe up spills immediately.
The self‑cleaning recharger cleans the inner blades and the
system outer foil. Brush or wash with water to remove beard
trimmings in other areas.
Use the self‑cleaning recharger in humidity less than 95%.
Depending on the environment, the shaver may not dry even if
you select a course that includes the “Dry” function. In this
case, wipe off any drops of water with a dry cloth.
water as it will damage them or cause an electric shock.
Do not remove the shaver from the self‑cleaning recharger
while using a course that includes the “Dry” function. A heater
is used so the area around the blades becomes extremely hot
and you may burn yourself.
Place the self‑cleaning recharger on a level and stable surface.
Otherwise the cleaning liquid may spill and discolor leather
products or other surfaces. Wipe up spills immediately.
The self‑cleaning recharger cleans the inner blades and the
system outer foil. Brush or wash with water to remove beard
trimmings in other areas.
Use the self‑cleaning recharger in humidity less than 95%.
Depending on the environment, the shaver may not dry even if
you select a course that includes the “Dry” function. In this
case, wipe off any drops of water with a dry cloth.
•
•
•
•
•
•
•
•
•
•
•
•
ES-LF71_EU.indb 3
2011/02/23 10:42:52