Panasonic CUNE9JKE Operating Guide

   CARE & CLEANING

  CARE & CLEANING

•  Do not use benzene, thinner or scouring powder.
•  Use only soap (  pH7) or neutral household detergent.
•  Do not use water hotter than 40°C.

  HINT

 HINT

•  To ensure optimal performance of the unit, cleaning 

maintenance have to be carried out at regular intervals. 

Dirty unit may caused malfunction and you may retrieve 

error code “H99”. Please consult authorized dealer.

•  Checking of remote control batteries.
•  No obstruction at air inlet and air outlet vents.
•  Use Auto OFF/ON button to select Cooling/Heating operation, 

after 15 minutes of operation, it is normal to have the following 

temperature difference between air inlet and air outlet vents: 

Cooling: ≥ 8°C 

Heating: ≥ 14°C

TURN OFF POWER SUPPLY then please consult 

authorized dealer under the following conditions:
•  Abnormal noise during operation.
•  Water/foreign particles have entered the remote control.
•  Water leaks from Indoor unit.
•  Circuit breaker switches off frequently.
•  Power cord becomes unnaturally warm.
•  Switches or buttons are not functioning properly.

•  Activate Heat mode for 2~3 hours to remove moisture left in 

the internal parts thoroughly to prevent mould growth.

•  Turn off the power supply.
•  Remove the remote control batteries.

• Clean the fi lters regularly.

• Wash/rinse the fi lters gently with water 

to avoid damage to the fi lter surface.

• Dry the fi lters thoroughly under 

the shade, away from fi re or direct 

sunlight.

•  Replace any damage fi lter.

Clean with dry cotton bud.

• Active e-ion 

generator cleaning is 

recommended every 6 

months.

CAUTION

• Switch off the power supply before cleaning.

• Do not touch the aluminium fi n, sharp parts may cause injury. 

•  Raise and pull to remove the front 

panel.

•  Wash gently and dry.
Close Front Panel

•  Press down both ends of the front 

panel to close it securely.

Wipe the unit gently with a soft, 

dry cloth.