Panasonic MCUG522 Operating Guide

Ensure filter is fully inserted and
sercurely close the filter door.

NOTE: When the cleaning of the filter no
longer restores vacuum cleaner suction to
full power, replace the filter.

DO NOT operate without secondary filter
installed.

Turn off and unplug the vacuum
cleaner.

Remove dust bag.

Press tab on filter door (located
behind dust bag) and pull open.

Remove remove filter.

The secondary filter protects the motor.  It is recommended to clean filter with cold water at least every three (3) months.
Check the secondary filter frequently and clean when dirty.  Check filter when installing a new dust bag.

Wash with cold water only. DO NOT use
detergent or soap.  DO NOT wash in a
dishwasher.

Once the filter is washed clean, squeeze
by hand and allow to air-dry.  DO NOT
install the filter when damp.

Allow filter to dry for 24 hours before
placing back into vacuum cleaner.

Reinstall the exhaust filter cover by
inserting the tab into the slot in the
vacuum cleaner. 

Press firmly to snap exhaust filter
cover into place.

Turn off and unplug the vacuum
cleaner.

Press latch to remove exhaust filter
cover.

The HEPA media exhaust filter removes dirt from exhaust air.  Check filter when changing dust bag and replace when
dirty.  The exhaust filter cannot be cleaned and should be replaced at least once each year.

Air Flow

Filtre d’évacuation

Air Flow

Grasp the exhaust filter and pull out
to remove.

Place the new filter into the vacuum
cleaner with the AIRFLOW arrow
pointing upwards.