Panasonic MCCG695 Operating Guide
5
Storing
Please perform the following
before storing.
Storage position
Park position
Turn off the power.
●
Rewind the mains lead.
●
(Hold the plug to ensure the mains lead
does not jump.)
Store the supplied nozzles.
●
Replacing the dust bag
Please replace a new
dust bag in the following
cases:
If the dust bag is not properly
installed, the dust cover will not close.
When the indicator turns red.
●
(Turn the power control to the higest
setting and lift the nozzle off the
floor.)
Suction power has dropped.
setting and lift the nozzle off the
floor.)
Suction power has dropped.
●
Caring for your cleaner
If suction power does not return after removing dust…
Check for blockages in hose, telescopic wand, and nozzles. Clean the pre-motor filter.
Cleaning
pre-motor
filter
Remove the dust bag first.
Remove the pre-motor filter and tap to
●
release dust.
Gently wash with water and dry in
●
shade if dust is not easily removed.
Cleaning
nozzle
Using an old toothbrush or similar
●
tool,clean any dirt or lint from the
brush.
Do not wash with water.
brush.
Do not wash with water.
●
MC-CG695K
•
MC-CG691K
•
After one year
has passed…
Replace the Exhaust filter.
●
Exhaust filter
(HEPA filter)
(HEPA filter)
To close
●
Attention
Do not use detergent or any other cleaning liquids.
●
Do not wash the pre-motor filter in a washing machine or dry it with a dryer other source of hot air.
●
Attach the pre-motor filter correctly (to avoid damaging motor).
●
After long periods of use, you may notice a slight rubber smell. This is normal.
●