Panasonic KXMC6020HX Operating Guide

87

L

The cable or the computer power cord is not connected correctly. Check the 
connections (page 20, 28).

L

The software is not running on the computer. Restart the software and try 
again.

L

The unit is warming up. Wait for a while.

L

The other party’s fax machine does not offer the polling function. Check with 
the other party.

L

The other party’s fax machine is busy or has run out of recording paper. Try 
again.

L

The document is jammed. Remove the jammed document (page 102).

L

Attempted to send or copy a document longer than 600 mm using the 
automatic document feeder. Press {Stop} to remove the document. Divide 
the document into two or more sheets and try again.

L

The memory is full of received documents due to a lack of recording paper 
or a recording paper jam. Install paper (page 15) or remove the jammed 
paper (page 97).

L

If feature #442 (page 68) is set to “

ALWAYS”,

–

check the connection between the computer and the unit.

–

check the computer is turned ON.

L

There is something wrong with the scanner position. Turn the power switch 
OFF, then ON. If the problem cannot be solved, contact our service 
personnel.

L

The unit is changing the colour calibration. Wait for a while.

L

A transmission error occurred. Try again.

L

The toner cartridge is not installed. Install it (page 10).

L

The left cover of the optional input tray is open. Close it.

b

L

The waste toner cartridge life is near its end. Replace the waste toner 
cartridge as soon as possible.

L

The waste toner cartridge is not installed. Install it (page 9).

b

L

The waste toner cartridge life is finished. Replace the waste toner cartridge 
immediately (page 9, 109).