Panasonic ES8901 Operating Guide

10

Beard trimmings may become attached to the cleaning tray of the 
self-cleaning recharger. Follow the steps below to remove them. 
We recommend doing this each time you change the detergent 
cartridge.

1. Be sure to remove the water 

tank and the appliance plug 
from the self-cleaning 
recharger.

Be careful not to spill the 
cleaning liquid.

2. Gently wipe off any beard 

trimmings attached to the 
inside of the cleaning tray with 
a cloth or tissue paper 
dampened with water.

Clean the corners and 
uneven parts of the cleaning 
tray with a cotton swab 
dampened with water.

•

•

Do not pull hard on the rubber blade protector at the bottom of 
the cleaning tray. The rubber may come off if you pull hard on it. 
It is only necessary to pull it up slightly.
Warning - Do not wash or apply water to the adaptor or self-
cleaning recharger. Failure to observe this may cause electric 
shock or result in short circuits.

•

•

(A)

(B)

1. Clean the inner blades using 

the short brush by moving it in 
direction (A). 
Clean the system outer foil, 
the shaver body and the 
trimmer using the long brush.

Do not move the short brush 
in direction (B) as it will 
damage the inner blades and 
affect their sharpness.
Do not use the short brush to 
clean the outer foils.

•

•

ES8249_EU.indb   10

2007/07/26   20:26:16