Panasonic TH-65LFB70E Operating Guide

Plug the AC cord into the display unit.
Plug the AC cord until it clicks.

Make sure that the AC cord is locked on 

both the left and right sides.

Unplug the AC cord pressing the 

two knobs.

When disconnecting the AC cord, be 

absolutely sure to disconnect the AC 

cord plug at the socket outlet fi rst.

1

 

2

To remove from the unit:

Keep pushing 

both side 

snaps

hole

snaps

hooks

Set the

tip in the

hooks

To loosen:

Keep

pushing

the knob

knob

Insert the clamper 

in a hole.

When using the Wall-hanging bracket (vertical)(TY-WK42PV20), use the holes 

 and 

 to secure the cables. If the 

clamper is used on the hole 

, the cables may be caught by the wall-hanging bracket.

Secure any excess cables with clamper as required.

One clamper is supplied with this unit. In case of securing cables at three positions, please purchase it separately.

If you need more clampers, purchase them from your dealer. (Available from the customer service)

Pull back the tabs

(in two places)

1 .

Open the 

Ferrite core

2.

Route the cable 

through and close

3.

Fix the Ferrite core 

with the cable tie

4.

Stereo mini plug (M3)

PC with DVI-D 
video out

Shared with PC IN.

Less than 

5 cm

Less than 

5 cm

Ferrite core 

(supplied)

DVI-video cable (Within 5 m)