Panasonic PT-L730NTE Operating Guide

- 83 -

q

q Insert the wireless card into the projector

For details of installing and removing the wireless card, refer to Section 2.2.
"Wireless card" on page 

w

w Press the MENU button to display the menu.
e

e Use and buttons 

r

r Press the ENTER button to display "Network setting" setting

Five different LAN settings (LAN 1-5) can be stored on the projector.
Selecting from LAN 1-5 with 

and 

buttons, press the ENTER button and its

status will be displayed.
To change the status, choose "RUN" from "Setting Wizard" and press the ENTER
button to move to the LAN setup wizard.
To enable the status, choose "OK" from "Setting Wizard" and press the ENTER
button.

The projector can encrypt the image data.
However, when the encryption function is enabled, it takes more time to transmit
images.
Selecting from KEY 1-4 with 

and 

buttons, press the ENTER button and the

WEP data will be displayed.
To change the setting of WEP, choose "RUN" from "Setting Wizard" and press the
ENTER button to move to the WEP setup wizard.
To enable the WEP data, choose "OK" from Setting Wizard and press the ENTER
button.

Assign an IP address to the projector.
Make setting according to the typical setting. However, the same IP address as that
of the PC with which the projector communicates cannot be used.
Use 

and 

buttons to change the value, 

and 

buttons to switch the

fields. Press the ENTER button when the setting is completed.

Set the subnet mask of the projector.
Make setting according to the typical setting.
Use 

and 

buttons to change the value, and use 

and 

buttons to switch

the fields.
Press the ENTER button when the setting is completed.

NETWORK

STATUS
WEP

LAN1

DISABLE

SELECT:[ 

↑ ][ ↓ ]

ADJUST:[

←][→]

ENTER:[ENTER]
ESC  :[MENU]