Panasonic PT-L730NTE Operating Guide
- 96 -
5.3. Operation of Web browser control
5.3.1. Starting Web browser control
Start the browser (Microsoft Internet Explorer is used as an
example here), and enter the IP address assigned to the
projector.
example here), and enter the IP address assigned to the
projector.
Web browser control will be started.
Note:
• Web browser control can also be started from Wireless Manager 2.0.
While Wireless Manager 2.0 is running, right-click the icon shown on the task bar,
select and left-click Remote Control .
select and left-click Remote Control .
5.3.2. Top screen
Note:
• The top screen may not be displayed depending on the browser. In that case, close
the window first and start again the Web browser control, or press the "CLT" + "H"
buttons at the same time.
buttons at the same time.
Disable the use of the proxy server (to use
the proxy server, refer to Section 5.2 "Settings of
Web browser control" on page
the proxy server, refer to Section 5.2 "Settings of
Web browser control" on page
Specify the IP address that has been assigned to
the projector in the network setting.
the projector in the network setting.
Select Japanese or English.
Enter the password if any has been defined.
In case you forget the password, assign a new
password to the projector (For security reason,
the projector does not show the password that
you have been using).
password to the projector (For security reason,
the projector does not show the password that
you have been using).
Note: