Panasonic KXMB1530E Operating Guide
2.1 Selecting the operation mode
(Scan/Copy) (Fax: KX-MB1520/
KX-MB1530 only)
(Scan/Copy) (Fax: KX-MB1520/
KX-MB1530 only)
You can select the desired mode by pressing the
following button repeatedly.
following button repeatedly.
KX-MB1500
KX-MB1520
KX-MB1530
– MFaxN (KX-MB1520/KX-MB1530 only): Select this
mode when using the unit as a fax machine
(page 38).
(page 38).
– MCopyN: Select this mode when using the unit as a
– MScanN: Select this mode when using the unit as a
Note:
R The default operation mode is the copy mode.
R You can change the default operation mode (feature
R The default operation mode is the copy mode.
R You can change the default operation mode (feature
#463 on page 55) and the timer before returning to
the default operation mode (feature #464 on
page 55) (KX-MB1520/KX-MB1530 only).
the default operation mode (feature #464 on
page 55) (KX-MB1520/KX-MB1530 only).
2.2 Setting the original
2.2.1 Using the scanner glass
A
B
1
Open the document cover (A).
2
Place the document FACE DOWN on the scanner
glass (B), aligning the top left of the document with
the corner where the mark is positioned.
glass (B), aligning the top left of the document with
the corner where the mark is positioned.
3
Close the document cover.
Note:
R Confirm that there are no documents in the automatic
R Confirm that there are no documents in the automatic
document feeder (KX-MB1530 only).
R Place the original onto the scanner glass gently. To
avoid malfunction, do not press down too firmly.
R If the original is a book thicker than 15 mm, do not
close the document cover.
R Confirm that any ink, paste or correction fluid has
dried completely, as this may mark the scanner glass.
R Effective scanning area is shown by the shaded area:
Effective scanning area
208 mm
289 mm
4 mm
4 mm
4 mm
4 mm
17
2. . Preparation
2. Preparation