Panasonic KXTGE275 Operating Guide
Registering a unit
Operating additional units
Additional handsets
Up to 6 handsets can be registered to the
base unit.
Important:
R See page 5 for information on the available
base unit.
Important:
R See page 5 for information on the available
model.
Registering a handset to the
base unit
base unit
The supplied handset and base unit are
pre-registered. If for some reason the handset
is not registered to the base unit, re-register
the handset.
pre-registered. If for some reason the handset
is not registered to the base unit, re-register
the handset.
1
Handset:
MMENUN#130
MMENUN#130
2
Base unit:
Press and hold MLOCATORN or
MHANDSET LOCATORN for about 5
seconds.
R If all registered handsets start ringing,
Press and hold MLOCATORN or
MHANDSET LOCATORN for about 5
seconds.
R If all registered handsets start ringing,
press MLOCATORN or MHANDSET
LOCATORN again to stop, then repeat
this step.
LOCATORN again to stop, then repeat
this step.
3
Handset:
Press MOKN, then wait until a long beep
sounds.
Press MOKN, then wait until a long beep
sounds.
Deregistering a handset
A handset can cancel its own registration to
the base unit, or other handsets registered to
the same base unit. This allows the handset to
end its wireless connection with the system.
the base unit, or other handsets registered to
the same base unit. This allows the handset to
end its wireless connection with the system.
1
MMENUN#131
R All handsets registered to the base unit
R All handsets registered to the base unit
are displayed.
2
MbN: Select the handset you want to
cancel. a MSELECTN
cancel. a MSELECTN
3
MbN: “Yes” a MSELECTN a MOFFN
48
For assistance, please visit http://www.panasonic.com/help
Programming
TGE26x_27x(en)_1216_ver041.pdf 48
TGE26x_27x(en)_1216_ver041.pdf 48
2013/12/16 19:32:29
2013/12/16 19:32:29