Panasonic KXMB1520E Operating Guide
Feature/Code
Selection
Setting the toner
maintenance time
MBNM1NM5NM8N
(KX-MB1520 only)
maintenance time
MBNM1NM5NM8N
(KX-MB1520 only)
The unit will automatically activate for maintenance, once every 24 hours. This
function prevents toner from solidifying inside the cartridge. This function is
important to prevent a unit malfunction and the noise that the unit makes during
this sequence cannot be stopped. However if the timing of this sequence is
inconvenient, you can change the scheduled start time.
1. MMenuN A MBNM1NM5NM8N A MSetN
2. Enter the maintenance start time.
function prevents toner from solidifying inside the cartridge. This function is
important to prevent a unit malfunction and the noise that the unit makes during
this sequence cannot be stopped. However if the timing of this sequence is
inconvenient, you can change the scheduled start time.
1. MMenuN A MBNM1NM5NM8N A MSetN
2. Enter the maintenance start time.
R The default time is “12:00”.
R If you selected 12-hour time entry (page 18), press MHN repeatedly to
R If you selected 12-hour time entry (page 18), press MHN repeatedly to
select AM or PM.
24-hour time entry.
3. MSetN A MMenuN
Resetting all features (and
deleting all data in memory)
MBNM1NM5NM9N
deleting all data in memory)
MBNM1NM5NM9N
Before you dispose of, transfer or return the product, activate this feature to
reset all programmable features and to delete all data stored in memory.
KX-MB1520 only: Phonebook (or caller information) and fax transmission data
(journal report and faxes received in memory) will be deleted.
M0N “NO” (default)
M1N “YES”
R Disconnect the telephone line cord (KX-MB1520 only) and USB cable
reset all programmable features and to delete all data stored in memory.
KX-MB1520 only: Phonebook (or caller information) and fax transmission data
(journal report and faxes received in memory) will be deleted.
M0N “NO” (default)
M1N “YES”
R Disconnect the telephone line cord (KX-MB1520 only) and USB cable
before activating this feature.
To reset all features:
1. MMenuN A MBNM1NM5NM9N
2. Press M1N to select “YES”. A MSetN
3. Press M1N to select “YES”. A MSetN
1. MMenuN A MBNM1NM5NM9N
2. Press M1N to select “YES”. A MSetN
3. Press M1N to select “YES”. A MSetN
Setting the ringer pattern
MBNM1NM6NM1N
(KX-MB1520 only)
MBNM1NM6NM1N
(KX-MB1520 only)
M1N “A” (default)
M2N “B”
M3N “C”
M2N “B”
M3N “C”
Setting the beep sounds and
keytones
MBNM1NM6NM5N
keytones
MBNM1NM6NM5N
M0N “OFF”: Deactivates this feature.
M1N “ON” (default): You will hear confirmation/error beep sounds and keytones.
M1N “ON” (default): You will hear confirmation/error beep sounds and keytones.
Note:
R Even if this feature is set to “OFF”, the unit beeps in some cases. For
R Even if this feature is set to “OFF”, the unit beeps in some cases. For
example:
– the memory reception alert setting (feature #437 on page 54) is
– the memory reception alert setting (feature #437 on page 54) is
activated (KX-MB1520 only).
– the front cover is opened.
Setting the off-hook alert
MBNM1NM7NM1N
(KX-MB1520 only)
MBNM1NM7NM1N
(KX-MB1520 only)
To alert you with a beeping sound when the telephone line has been left
off-hook for more than 1 minute without dialling.
M0N “OFF”: Deactivates this feature.
M1N “ON” (default): You have to press MStopN or MSP-PhoneN to stop the
beeping sound.
off-hook for more than 1 minute without dialling.
M0N “OFF”: Deactivates this feature.
M1N “ON” (default): You have to press MStopN or MSP-PhoneN to stop the
beeping sound.
48
8. Programmable Features