Panasonic KYB84BXBXD Operating Guide

12

13

 - This appliance must be supplied with the proper voltage and frequency, and 

connected to an individual, properly earthed branch circuit, protected by a 

circuit breaker or fuse. (The rating plate is on the bottom of the appliance.)

 - This appliance is not fitted with other means for disconnection from 

the supply mains having a contact separation in all poles that provide 

full disconnection under overvoltage category III conditions. Means for 

disconnection must be incorporated in the fixed wiring in accordance with 

the wiring rules.

 - You must use a two-wire, single-phase A.C. 220-240 V, 40 A, 50 Hz 

electrical system. (It is also possible to use a four-wire, three-phase.)  

If you connect to aluminum wiring, properly use connectors approved for 

use with aluminum wiring.

 - Check with the local utilities for electrical codes applied in the area. 

Failure to wire the appliance according to governing codes may result in a 

hazardous condition. 

 - After installation, show the customer where the breaker for the appliance is 

located.

 - In accordance with the electrical wiring rules, incorporate the earth leakage 

circuit breaker in the home electrical wire.

 - Follow the specification of the earth leakage circuit breaker as follows. 

  Rated current: 40 A, rated sensitivity current: 30 mA

Turn off power at the circuit breaker or remove fuses to the appliance 

branch circuit.

Connect the power cord in accordance with all governing codes and 

ordinances.

 - Single-phase connection (220-240 V ~ 50 Hz) 

Connect the wires in accordance with the instructions given in the 

following table and diagram:

 - Three-phase connection (380-415 V 2N~ 50 Hz) 

Separate the L wires and connect them in accordance with the 

instructions given in the following table and diagram:

E: Yellow / Green  

(Connect to the earth terminal)
N: Grey and Blue together

L: Black and Brown together

(Connect to the live terminal)

E

N

L

E: Yellow / Green  

(Connect to the earth terminal)
N: Grey and Blue together

L1: Black 

L2: Brown 

(Connect to the live terminal)

L1
L2

E

N