Panasonic KXMB2030SP Operating Guide

R A4 or letter size recording paper can be used.

Important:
R Use this mode with an extension telephone.

Make sure feature #404 is set to “TEL” beforehand
(page 65).

Press MFax Auto AnswerN repeatedly to display
“TEL MODE”.
R The MFax Auto AnswerN light turns OFF.

Fax Auto 

  Answer

Note:
R If you do not answer the call within 10 rings, the unit

will temporarily switch to fax reception. The other
party can then send a fax.

How to receive faxes with an extension telephone
If you have another telephone connected to the [EXT]
jack or the same line (extension telephone), you can use
the extension telephone to receive faxes.
1. When the extension telephone rings, lift the handset

of the extension telephone.

2. When:

– document reception is required,
– a fax calling tone (slow beep) is heard, or
– no sound is heard,
press MGN MBN M9N (default fax activation code)
firmly.

3. Replace the handset.

Note:
R To stop receiving, see page 79.
R To receive fax documents using the extension

telephone, make sure remote fax activation is turned

ON (feature #434 on page 67) beforehand. The
default setting is ON.

Make sure feature #404 is set to “TEL/FAX”
beforehand (page 65).

Press MFax Auto AnswerN repeatedly to display
“TEL/FAX MODE”.
R The MFax Auto AnswerN light turns OFF.

The ringer volume setting should be ON (page 22).

Fax Auto 

  Answer

MStopN

How phone calls and faxes are received
1. “INCOMING CALL” will be displayed but the unit will

not ring.

2. The unit will wait for the duration of 2 rings before

answering the call.
R The number of rings is determined by the “TEL/

FAX delayed ring count” (feature #212 on
page 65).

R During this time, an extension telephone will ring.

3. The unit will answer the call and try to detect a fax

calling tone.
When a fax calling tone is detected
The unit receives the fax automatically without
ringing.

When a fax calling tone is not detected
A The unit will ring 3 times. You may answer the call.

50