Panasonic SC-ZT2 Operating Guide

VQT2R71

•  Turn off all equipment before making any connections.
•  To connect equipment, refer to the appropriate operating 

instructions.

When you make the above connection and you use Panasonic TV (VIERA), you can automatically switch this system’s input by 
switching the input source of TV (VIERA) to STB in the following procedure.
Preparation: Make sure that this system has been turned on. (➜ page 18)

The setting items are displayed. (

➜ page 23)

3. Press [w][q] to select “STB AUDIO ” and press [OK].

4. Press [e][r] to select “SET ” and press [OK].

SET : The setting is automatically switched to “AUX2 / STB ”.
OFF : The setting is not automatically switched to “AUX2 / STB ”. (factory setting)

5. Press [  RETURN] several times to select “EXIT ” and press [OK] 

• “

STB AUDIO ” in step 3 is displayed only when the unit is connected to the Panasonic TV (VIERA).

  Also, this is not displayed when the step 

1 operation is not performed.

•  If you change the connection after setting, select “

OFF ” once and “SET ” again.

•  When you select “

EXIT ” and press [OK] in step 3, the setting mode finishes.

If the optical digital output terminal is available, use connection A.
If the optical digital output terminal is not available, use connection B.

To listen to the sound through this system after making all the connections select the input mode to “TV ” and reduce the volume on the television to minimum.

Connect STB, etc. to the HDMI input terminal on this system. (➜ pages 10, 13)