Panasonic SC-ZT1 Operating Guide

RQT9472

•  Turn off all equipment before making any connections.
•  To connect equipment, refer to the appropriate operating 

instructions.

Use this connection to enjoy STB multi-channel sources on this system.

When you make the above connection and you use Panasonic TV (VIERA), you can automatically switch this system’s input by 
switching the input source of TV (VIERA) to STB in the following procedure.
Preparation: Make sure that this system has been turned on. (➜ page 18)

The setting items are displayed. (

➜ page 23)

3. Press [w][q] to select “STB AUDIO ” and press [OK].

4. Press [e][r] to select “SET ” and press [OK].

SET : The setting is automatically switched to “AUX2 / STB ”.
OFF : The setting is not automatically switched to “AUX2 / STB ”. (factory setting)

5. Press [  RETURN] several times to select “EXIT ” and press [OK] 

• “

STB AUDIO ” in step 3 is displayed only when the unit is connected to the Panasonic TV (VIERA).

  Also, this is not displayed when the step 

1 operation is not performed.

•  If you change the connection after setting, select “

OFF ” once and “SET ” again.

•  When you select “

EXIT ” and press [OK] in step 3, the setting mode finishes.

 

A

:  Connect the video cable directly from the other equipment to the television. 

B

:  Use this connection so audio from the equipment can be heard through the television’s speakers even if this system is in standby mode.

Reduce the volume on the television and select “TV ” after you have made connections as above if you want to use this system.

A

B

21-pin scart 
cable connection 
also possible.

21-pin scart 
cable connection 
also possible.