Panasonic sc-pm91d Operating Guide

30

RQT7932

•  Connect an active subwoofer (not included). 

•  Place the subwoofer as close as possible to the front center.

Every time you do this: 
SUB.W ON 

 SUB.W OFF

Adjust the volume on the subwoofer to suit your preference.

Use outdoor antennas if radio reception is poor.

•  Disconnect the FM indoor antenna.

•  The antenna should be installed by a competent technician.
Rework your outdoor antenna’s 75 Ω coaxial cable as follows.

Disconnect the outdoor antenna when the unit is not in use. Do not use the outdoor antenna during a lightning storm.

•  Run  a  piece  of  vinyl  wire  horizontally  across  a  window  or  other 

convenient location.

•  Leave the loop antenna connected.

Ω)  LOW (6Ω)

Ω

 

 

Ω

FM outdoor antenna

75 Ω coaxial cable 

Antenna plug
(included)

1)  Remove a piece of the 

outer vinyl insulator.

2)  Carefully pull the tabs apart 

to remove the cover.

7 mm (

9

/

32

”)

10 mm (

13

/

32

”) Peel back

3)  Install the coaxial cable.
 

Clamp the cable conductor, 
and wind it on so that it does 
not contact anything else.

4)  Attach the cover.

Clamp with pliers

10 mm (

13

/

32

”)

AM outdoor antenna

5-12m

Change the code if you find the remote control unintentionally also 
controls other equipment.

  Press [TUNER/AUX] to select “AUX”.
  Press and hold [TUNER/AUX] on the main unit and then press and 

hold [2] (or [1]) on the remote control.

  “REMOTE 2” appears on the display.

  Press and hold [ENTER] and [2] (or [1]) on the remote control for 

at least 2 seconds. 

If the remote control and main unit are using different codes, a message 
appears on the main unit’s display showing the main unit’s current code. 
Follow step 2 to change the remote control’s code to match it.

➡

AM loop 
antenna 
(included)

SCPM91D-Pbook.indb   30

3/17/2005   11:55:55 AM