Panasonic KX-FP215 Operating Guide
8. Programmable Features
40
Changing the fax
activation code
activation code
{#}{
4}{1}
If you wish to use an extension telephone (page 27) to receive
faxes, activate this feature and program the activation code.
{
faxes, activate this feature and program the activation code.
{
0} “
OFF”
{
1} “
ON” (default)
1. {MENU} i {#}{4}{1}
2. Press {1} to select “
ON”. i {SET}
3. Enter your code from 2 to 4 digits, using 0-9, {*} and {#}.
L
The default code is “;
#9”.
4. {SET} i {MENU}
Setting the memory
reception alert
reception alert
{#}{
4}{4}
To alert you with a beeping sound when a received fax document
is stored into memory due to some existing problem.
{
is stored into memory due to some existing problem.
{
0} “
OFF”: Deactivates this feature.
{
1} “
ON” (default): You will hear a beeping sound.
Note:
L
The slow beeps will continue until you clear the printing
problem and make sure the unit is supplied with enough paper
to print the stored document.
problem and make sure the unit is supplied with enough paper
to print the stored document.
Setting friendly
reception
reception
{#}{
4}{6}
To receive a fax automatically when you answer a call and hear a
fax calling tone (slow beep).
{
fax calling tone (slow beep).
{
0} “
OFF”: You have to press {FAX START} for fax reception.
{
1} “
ON” (default): You do not have to press {FAX START} for fax
reception.
Setting the fax voice
guidance
guidance
{#}{
4}{7}
If you wish to hear voice guidance for fax transmission/reception,
activate this feature.
{
activate this feature.
{
0} “
OFF”
{
1} “
ON” (default)
{
2} “
ERROR”: To hear voice guidance only when fax
transmission/reception fails.
Changing the recording
time for your TAM/FAX
greeting message
time for your TAM/FAX
greeting message
{#}{
5}{4}
{
1} “
16s” (default): Maximum recording time is 16 seconds.
{
2} “
60s”: Maximum recording time is 60 seconds.
See page 33 for details.
Setting the incoming
message monitor
message monitor
{#}{
6}{7}
To hear an incoming message (ICM) from the speaker when the
answering machine is recording the message.
{
answering machine is recording the message.
{
0} “
OFF”
{
1} “
ON” (default)
Setting the Error
Correction Mode (ECM)
Correction Mode (ECM)
{#}{
6}{8}
This feature is available when the transmitting/receiving fax
machines are ECM compatible.
{
machines are ECM compatible.
{
0} “
OFF”: Deactivates this feature.
{
1} “
ON” (default): If there is an error during fax
transmission/reception, the fax machine will support the
communication.
communication.
Note:
L
You cannot change the setting when received documents are
in memory.
in memory.
Feature
Feature code
Selection
FP215-PNQX1896ZA-OI-en.book Page 40 Tuesday, December 23, 2008 11:09 AM