Panasonic CUE9PKE Operating Guide

AUTO : During operation mode selection the POWER indicator blinks.

• Unit selects operation mode every 10 minutes according to setting temperature and room temperature.

• Unit selects operation mode every 3 hours according to setting temperature, outdoor temperature and room 

temperature.

HEAT : Unit takes a while to warm up. The POWER indicator blinks during this operation.
COOL:  Use curtains to screen off sunlight and outdoor heat to reduce power consumption during COOL mode.
DRY : Unit operates at low fan speed to give a gentle cooling operation.

Depending on the unit’s accumulated operation time, nanoe-G in-fi lter deactivation may activate only once a day after 
the unit turned off.
To remove the moisture left in the internal parts, the fan will operate for 30 minutes with louver opened slightly. This 
process only applicable when the unit is operated in COOL/DRY mode before turned off. Then, nanoe-G deactivates 
viruses/bacteria on the fi lter for 2 hours with fan stopped and louver closed.
Do not turn off the power supply during this operation. After power failure, this operation will not resume.

ECONAVI

AUTO

COMFORT

or

AIR SWING

When manual AIR SWING is selected, 
the ECONAVI and AUTO COMFORT 
operations will be cancelled.

The unit will start to initialise
(for approximately 1 minute)

The human activity sensor 
and the sunlight sensor will 
start to detect.

Set 

temperature

ECONAVI ; Detecting human presence and activity, the unit controls room temperature to save energy.

Set 

temperature

Set 
Fan Speed

AUTO COMFORT ; Detecting human presence and activity, the unit controls room temperature to keep human 

ECONAVI and AUTO COMFORT take advantage of 
the human nature that human being takes time to feel 
the temperature rise during low activity level; the unit 
adjusts temperature to maximise energy saving 
without sacrificing the comfort.

comfortable consistently.

HEAT

COOL/DRY

HEAT

COOL/DRY

*  During low activity, fan speed 1 tap up for first 15 minutes or until set temperature is reached.
**  During human absence, maximum fan speed for COOL/DRY mode is medium fan.

-2 °C

-2 °C

+1 °C

+2 °C

-1 °C

Precise control of temperature during low activity to maximise energy saving.

Set 
temperature

COOL/DRY

+1 tap

”0HGLXP)DQ

+1 tap*

-2 °C

+0.3 °C

-2 °C

+2 °C

+1 °C

8

To learn more...

Single split system

Multi split system