Panasonic KXTG6583 Operating Guide
Useful Information
62
For assistance, please visit http://www.panasonic.com/help
Error messages
If the unit detects a problem, one of the following messages is shown on the display.
Display message
Cause/solution
Base no power
or
No link. Re-connect
base AC adaptor.
base AC adaptor.
L
The handset has lost communication with the
base unit. Move closer to the base unit and try
again.
base unit. Move closer to the base unit and try
again.
L
Unplug the base unit’s AC adaptor to reset the
unit. Reconnect the adaptor and try again.
unit. Reconnect the adaptor and try again.
L
The handset’s registration may have been
canceled. Re-register the handset (page 42).
canceled. Re-register the handset (page 42).
Busy
L
No cellular phone is registered to the base
unit. Register a cellular phone (page 15).
unit. Register a cellular phone (page 15).
L
The called unit is in use.
L
Other units are in use and the system is busy.
Try again later.
Try again later.
L
The handset you are using is too far from the
base unit. Move closer and try again.
base unit. Move closer and try again.
Call phone company for
your access #
your access #
L
You have not stored the voice mail access
number. Store the number (page 57).
number. Store the number (page 57).
Check tel line
L
The supplied telephone line cord has not been
connected yet or not connected properly.
Check the connections (page 8).
connected yet or not connected properly.
Check the connections (page 8).
L
If you do not connect the telephone line cord
and use only cellular lines, set the cellular line
only mode (page 17).
and use only cellular lines, set the cellular line
only mode (page 17).
Error!!
L
Recording was too short. Try again.
L
Someone is using a cellular line or headset, or
copying phonebook entries. Try again later.
copying phonebook entries. Try again later.
L
The phonebook copy is incomplete (page 47).
The cellular phone is disconnected from the
base unit. Make sure that other Bluetooth
devices are not connected to the cellular
phone, and try again.
The cellular phone is disconnected from the
base unit. Make sure that other Bluetooth
devices are not connected to the cellular
phone, and try again.
Failed
L
Although the unit tried to connect to the
cellular phone or headset, the connection has
been failed.
– Someone is using a cellular line or headset.
cellular phone or headset, the connection has
been failed.
– Someone is using a cellular line or headset.
Try again later.
– Make sure that the cellular phone or
headset is not connected to other Bluetooth
devices.
devices.
TG658x(e).book Page 62 Friday, February 26, 2010 7:50 AM