Panasonic SC-HTB520 Operating Guide

Page of 32
3
Precautions
Caution for AC Mains Lead
(For the United Kingdom and Ireland)
(“EB” area code model only)
(For Saudi Arabia and Kuwait)
(“GS” area code model only)
For your safety, please read the following text 
carefully.
This appliance is supplied with a moulded three pin 
mains plug for your safety and convenience.
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure 
that the replacement fuse has a rating of 5-ampere 
and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark Ï or the BSI mark Ì on 
the body of the fuse.
If the plug contains a removable fuse cover you 
must ensure that it is refitted when the fuse is 
replaced.
If you lose the fuse cover the plug must not be used 
until a replacement cover is obtained.
A replacement fuse cover can be purchased from 
your local dealer.
If a new plug is to be fitted please observe the 
wiring code as stated below.
If in any doubt please consult a qualified electrician.
IMPORTANT
The wires in this mains lead are coloured in 
accordance with the following code:
Blue: Neutral, Brown: Live.
As these colours may not correspond with the 
coloured markings identifying the terminals in your 
plug, proceed as follows:
The wire which is coloured Blue must be connected 
to the terminal which is marked with the letter N or 
coloured Black or Blue.
The wire which is coloured Brown must be 
connected to the terminal which is marked with the 
letter L or coloured Brown or Red.
WARNING: DO NOT CONNECT EITHER WIRE 
TO THE EARTH TERMINAL WHICH IS MARKED 
WITH THE LETTER E, BY THE EARTH SYMBOL 
Ó OR COLOURED GREEN OR GREEN/
YELLOW.
THIS PLUG IS NOT WATERPROOF—KEEP 
DRY.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type 
of AC mains plug (figures A and B). Confirm the 
AC mains plug fitted and follow the instructions 
below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
2. Replace the fuse and close or attach the fuse 
cover.
CAUTION!
IF THE FITTED MOULDED PLUG IS 
UNSUITABLE FOR THE SOCKET OUTLET IN 
YOUR HOME THEN THE FUSE SHOULD BE 
REMOVED AND THE PLUG CUT OFF AND 
DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE 
ELECTRICAL SHOCK IF THE CUT OFF PLUG 
IS INSERTED INTO ANY 13-AMPERE SOCKET.
Figure A
Figure B
Fuse cover
Figure A
Figure B
Fuse
(5 ampere)
Fuse
(5 ampere)
SC-HTB520EGEBGNGS_RQTX1279-B.book  Page 3  Tuesday, February 22, 2011  9:05 AM