Panasonic SC-PM25 Operating Guide
RQT5717
14
Listening operations
1
2
3
5
2
5
A
A
B
C
D
3
1
1
2
3
4
5
6
7
9
0
10
CANCEL
AUTO OFF SLEEP
8
PROGRAM
TUNE MODE
PLAY MODE
VOLUME
DISPLAY
DIMMER
MUTING
SOUND
VIRTUALIZER
REV MODE
SELECTOR
TAPE
TUNER
CD
CLOCK
TIMER
PLAY
REC
REW
CLEAR
FF
BASS
TREBLE
1
2
3
4
5
6
7
9
0
10
8
SELECTOR
PROGRAM
CD
-
/
J
1
2
3
4
5
6
7
9
0
10
CANCEL
AUTO OFF SLEEP
8
PROGRAM
TUNE MODE
PLAY MODE
REV MODE
SELECTOR
TAPE
TUNER
CD
CLOCK
TIMER
PLAY
REC
REW
CLEAR
FF
BASS
TREBLE
CANCEL
PRGM
PRGM
PRGM
Program order
Specified track number
Indicates
program mode
CDs
Program play
by remote control only
This function allows you to program up to 24 tracks.
1
Press [SELECTOR] to select the CD
mode.
mode.
2
(In the stop mode)
Press [PROGRAM].
3
Press the numeric button(s) to select
the track you want to play in the
desired sequence.
the track you want to play in the
desired sequence.
4
Repeat step 3 until you have
programmed all the tracks you want.
programmed all the tracks you want.
5
Press [CD
-
/
J
].
Play will start in the programmed sequence.
Play will stop automatically when all the programmed tracks
have been played.
Play will stop automatically when all the programmed tracks
have been played.
For your reference
You can also select tracks for programming by pressing [
g
] or
[
f
] and [PROGRAM] instead of following steps 2 to 3.
1
1
1
1
1
Select desired tracks using the [
g
] or [
f
].
2
2
2
2
2
Press [PROGRAM].
To cancel program play mode
• Press [PROGRAM] in the stop mode.
Programmed contents will be saved in memory.
• Press [
L
CLEAR] in the stop mode.
This will also erase the entire program.
To select a two-digit track
Press [
≥≥≥≥≥
10] and then the two numbers you want.
A
When “-- --:-- --” is displayed
Total play time of the programmed tracks equals, or exceeds 100
minutes.
Tracks can still be programmed and played.
minutes.
Tracks can still be programmed and played.
B
When “FULL” appears
The number of programmed tracks is limited to 24. No further
tracks can be programmed.
tracks can be programmed.
C
Check program contents.
Check to see if “P” is displayed, then press either [
g
] or [
f
].
Everytime you press one of the buttons, the track and program
No. are shown on the display.
Add to the program.
In stop mode, repeat step 3.
No. are shown on the display.
Add to the program.
In stop mode, repeat step 3.
D
Cancel entries
From the last
Press [CANCEL].
programmed track.
A specified track only
C
Check to see if “P” is displayed, then
select the track with [
g
] or [
f
],
and press [CANCEL] within 3 seconds.
All tracks
Press [
L
CLEAR].
Memory retention
Your program is retained in memory for about 2 weeks while the
system is unplugged.
system is unplugged.
To replay your program
If you tuned OFF your program with [PROGRAM], you can play it
again as explained below.
again as explained below.
1
1
1
1
1
Press [PROGRAM].
2
2
2
2
2
Press [CD
-
/
J
].
e14-16
1/17/01, 6:31 PM
14