Panasonic SC-PM25 Operating Guide

5

RQT5717

R6, AA, UM-3

• Align the poles (+ and –) properly when inserting the batteries.
• Do not mix old and new batteries or different types of batteries.
• Do not recharge ordinary dry cell batteries.
• Do not heat or disassemble the batteries. Do not allow them to

contact flame or water.

• Remove the batteries if the unit is not to be used for a long time.
• Do not keep together with metallic objects such as necklaces.
• Do not use rechargeable type batteries.
• Do not use batteries if the covering has been peeled off.

Mishandling of batteries can cause electrolyte leakage which can
damage items the fluid contacts and may cause a fire.
If electrolyte leaks from the batteries, consult your dealer.
Wash thoroughly with water if electrolyte comes in contact with any
part of your body.

• Do not place obstacles between the remote control signal sensor

and remote control unit.

• Do not expose the remote control signal sensor to direct sunlight or

to the bright light of a fluorescent  light.

• Take care to keep the remote control signal sensor and end of the

remote control unit free from dust.

• If this system is installed in a rack with glass doors, the glass doors’

thickness or color might make it necessary to use the remote
control a shorter distance from the system.

• Never place heavy items on top of the unit.
• Do not disassemble or reconstruct the unit.
• Do not spill water or other liquids into the unit.

Speakers are designed identically so that no left or right channel
orientation is necessary.

• Keep your speakers at least 10 mm (

13

/

32

˝) away from the system

for proper ventilation.

• These speakers do not have magnetic shielding. Do not place them

near televisions, personal computers or other devices easily
influenced by magnetism.

• To avoid damage to the speakers, do not touch the speakers cones

if you have taken the nets off.

Selecting fine audio equipment such as the unit you’ve just pur-
chased is only the start of your musical enjoyment. Now it’s time to
consider how you can maximize the fun and excitement your equip-
ment offers. This manufacturer and the Electronic Industries Asso-
ciation’s Consumer Electronics Group want you to get the most out
of your equipment by playing it at a safe level. One that lets the
sound come through loud and clear without annoying blaring or dis-
tortion—and, most importantly, without affecting your sensitive
hearing.

We recommend you to avoid prolonged exposure to excessive
noise.

Sound can be deceiving. Over time your hearing “comfort level”
adapts to higher volumes of sound. So what sounds “normal” can
actually be loud and harmful to your hearing.
Guard against this by setting your equipment at a safe level
BEFORE your hearing adapts.
To establish a safe level:
• Start your volume control at a low setting.
• Slowly increase the sound until you can hear it comfortably and

clearly, and without distortion.

Once you have established a comfortable sound level:
• Set the dial and leave it there.

Taking a minute to do this now will help to prevent hearing damage
or loss in the future. After all, we want you listening for a lifetime.

Remote control
signal sensor

Transmission window

About 7 meters
in front of the
signal sensor

e4-9

1/17/01, 6:22 PM

5